Extrusion相关论文
研究了挤压温度对挤压态Mg-2Zn-1Y-0.5Zr生物可降解镁合金动态再结晶、织构和拉伸性能的影响,基于显微组织和腐蚀形态阐述了挤压态......
The fatigue damage behavior of the nanocrystalline Au films on polyimide substrates was investigated.It was found that t......
Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradab
The effect of extrusion temperature and ratio on the microstructure, hardness, compression, and corrosion behavior of Mg......
Mg-Al-Zn-Ca-Y alloys with excellent ignition and corrosion resistances-termed SEN alloys (where the letters “S,” “E,......
The as-cast Mg-6Li-4Zn-xMn alloys were prepared and extruded at 280 ℃ with an extrusion ratio of 25∶1.The effects of M......
通过交替堆叠不同状态下的AZ91挤压板设计三种类型的层合板,以改善其力学性能.拉伸试验表明,固溶处理后的板材与时效处理后的板材......
The Mg-8Sn-4Zn-2Al (TZA842,in wt％) alloys with different initial microstructure (as-cast-AC and homogenization treatment-......
Microstructure and Texture Evolution During the Direct Extrusion and Bending-Shear Deformation of AZ
...
Mg-2Al-1.2Ca-0.2Mn (at％)-based alloys with Ce-rich mischmetal (MM) substitution of 0-0.6 at％ for Ca were hot extruded at 4......
A new kind of Mg-2Zn-0.6Ca (wt％) alloy was fabricated by casting and hot extrusion as a high-ductility structural materia......
The microstructure,mechanical properties and corrosion behavior of Mg-2Zn-0.6Zr alloy under the as-cast and asextruded c......
Mg and its alloys are the lightest structural metals available and are extremely attractive for applications as lightwei......
In order to study the corrosion resistance of extruded magnesium alloys,the Mg-4Zn-2Gd-0.5Ca alloy was extruded at the s......
Evolution of Microstructure, Residual Stress, and Tensile Properties of Mg-Zn-Y-La-Zr Magnesium Allo
The microstructure,texture,residual stress,and tensile properties of Mg-6Zn-2Y-1La-0.5Zr (wt％) magnesium alloy were inves......
...
Mg-6Zn-xCe (x =0,0.6,1.0,2.0) alloy ingots with diameter of 50 mm were extruded into bars with diameter of 12 mm at 300 ......
Three batches of full fat soybean (FFSB) were wet extruded at three temperatures.Two hundred forty,day old Ross 308 male......
Correlation between protein solubility in KOH of full fat soybean extruded at three temperatures and
The protein solubility in KOH (PSKOH) is used to identify overprocessed full fat soybean meal.This experiment was conduc......
The zinc oxide nanoparticles were synthesized in the presence and absence of multi walled carbon nanotubes (CNTs) using ......
Influences of aging temperature and time on the microstructure and mechanical properties of 6005A al
The influences of aging time and aging temperature on the microstructure and mechanical properties are investigated on t......
...
Indirect extrusion of Mg-l0%Sn (mass fraction) alloys was performed at three different working temperatures.The effect o......
...
Three-dimensional(3D)extrusion-based bioprinting is widely used in tissue engineering and regener-ative medicine to crea......
Lead extrusion dampers are supplemental energy-dissipation devices that are used to mitigate seismic structural damage.S......
<p> <span><span style=\"font-family:\"\">This paper presents the plant design for fuel production from plastic was......
The term extrusion refers to a family of continuous processing techniques in which materials are forced through cons......
Effect of Microstructures and Textures on Different Surfaces on Corrosion Behavior of an as-Extruded
The effect of textures on different surfaces of an as-extruded Mg-4 Al-1 Sn-1 Zn(ATZ411) alloy sheet on its corrosion be......
Pancreatitis is an increasingly common and sometimes severe disease that lacks a specific therapy.The pathogenesis of pa......
【正】 The research project-"The Preparationand Application of High PerformanceInorganic/Macromolecular Nano-meterCompou......
The superplasticity of AINp/6061Al composite, fabricated by powder metallurgy method and hot-rolled after extrusion, was......
The numerical simulation of extrudate swell is significant in extrusion processing.Precise prediction of extrudate swell......
Synergistic Effect of Phosphite with Fullerene C_(60) and Fullerenol C_(60)(OH)_(24) as Antioxidants
Polypropylene samples with fullerene C60, fullerenol C60(OH)24, 1010, C60/168, C60-OH/168 and 1010/168 as antioxidants w......
采用熔体流动速率仪考察了温度．剪切应力．以及微胶囊红磷（MRP）含量对聚丙烯（PP）／MRP复合体系熔体挤出胀大比的影响。结果表明：PP／MRP复合体......
According to the great demand for the“green” plastics processing technology of the low energy consumption,high efficie......
We reported an approach to reconstruct the complex phase morphology of impact polypropylene copolymer(IPC) with core-she......
In this work, surface-mazelike Zn O, Cu, and Ni hierarchical structures were synthesized via a versatile ethylene glycol......
The Rheological Property and Foam Morphology of Linear Polypropylene and Long Chain Branching Polypr
The rheological behavior, thermal properties and foam morphology of linear polypropylene and long chain branching polypr......
The microlayer or nanolayer coextrusion of hundreds or thousands of alternating low density polyethylene(LDPE)/polystyre......
Effect of Starch/Polylactic Acid Ratio on the Interdependence of Two-Phase and the Properties of Com
Starch/polylactic acid(PLA) composites were prepared by melt extrusion, with corn starch and PLA as raw materials, glyce......
The aim of this work was to develop an alginate-casein composite microsphere as a bioactive vehicle for oral administrat......
Based on the general solution to stress equilibrium differential equation and the analytical expressions in mechanical ......
Numerical simulation of a sheet metal extrusion process by using thermal-mechanical coupling EAS FEM
The thermal-mechanical coupling finite element method (FEM) was used to simulate a non-isothermal sheet metal extrusion ......
Binary Al-4Mg alloy have been deformed by hot torsion at 300-500℃ and strain rates of 0.006-1.587 s of 5.5. The specim......
A new technology of forward extrusion and cross rolling has been developed to process the rear axle shaft sleeve of ligh......
