一、概述目前国内提升机容器位置的测量,都是根据卷筒旋转带动深度指示器来判断容器位置的。由于多绳提升机钢绳打滑和蠕动,单绳提升机钢绳的松弛,必然产生误差。用直接测量的方法可以避免这些误差,我所已研制的钢丝绳感应式减速信号发送器是直接测量提升容器位置的无触点式的电磁感应开关。根据要求需 First, an overview of the current position of the elevator container measurement, are driven by the drum rotation of the depth indicator to determine the position of the container. Due to the slippage and creep of the rope of a multi-rope hoist, the relaxation of the ropes of a single rope hoist inevitably results in errors. The direct measurement method to avoid these errors, I have developed wire rope induction deceleration signal transmitter is to directly measure the position of the container to enhance the contactless electromagnetic induction switch. On request