论文部分内容阅读
二、耕整机的安装水田耕整机机型较多,但其结构与功能基本相同。现以1LBP-4.5型耕整机为例来说明其安装、田间作业与调整、安全与维护技术。 8.新发动机的安装如何进行? 安装发动机时,先将滑动机座置于动力架机座滑动底板上,然后将发动机搁置在滑动机座位置上,用4个机脚螺栓将其紧固好即可。要求当用手推拉发动机时,滑动底板能在动力架机座滑动底板上作前后自由滑动;发动机上的皮带轮与齿轮箱上的皮带轮应在同一平面上。当两皮带轮位置不对时,先旋松机脚螺栓,移动发动机,直至两皮带轮在同一平面上,将机脚螺栓紧固即可。
Second, tillage machine installation Paddy tillage machine type more, but its structure and function is basically the same. Now 1LBP-4.5 tillage machine as an example to illustrate its installation, field operations and adjustment, safety and maintenance techniques. 8. How to install the new engine? Installation of the engine, the first sliding base placed on the glider chassis sliding floor, and then the engine will be placed in the sliding base position, with four anchor bolts to tighten it Can be. It is required that when sliding the engine by hand, the sliding base plate can slide freely back and forth on the sliding base plate of the power base frame; the pulley on the engine and the pulley on the gear box should be on the same plane. When the two pulleys position is wrong, first loosen the machine bolts, move the engine until the two pulleys in the same plane, the machine can bolt the bolts.