本文介绍一种千分尺离、压线和测杆拆卸的修理工具。这种修理工具的优点:使用方便,拆修的零件不易损坏。同过去用的冲击法相比,不但保证了修理质量,而且还提高工效两三倍。 1.修理工具各部件装配要求如图1所示。①搬杆1和垫块6分别装配在千斤螺杆2的孔和轴上,使达到移动、转动 This article describes a micrometer off, pressure line and rod removal repair tool. The advantages of this repair tool: easy to use, easy to repair the damaged parts. Compared with the impact method used in the past, not only to ensure the quality of repairs, but also to improve work efficiency two or three times. 1. Repair tool assembly requirements shown in Figure 1. ① Move the lever 1 and the spacer 6 are respectively assembled on the hole and the shaft of the screw rod 2 so as to move and rotate