对下述石英剂量学特性进行了研究:(1)石英的剂量灵敏度在不同退火温度下随不同前剂量的变化;(2)使石英的剂量灵敏度恢复到原有水平的最佳退火温度的选择;(3)在500℃,8小时退火温度时,石英的剂量灵敏度随退火时间的变化;(4)经前剂量照射的石英样品在700℃,3小时退火后石英的剂量灵敏度恢复到原有水平的可能性。结果表明,在700℃,3小时的退火条件下,可使石英的剂量灵敏度变化最小,并几乎恢复了其原有水平。 The following quartz metrological properties were studied: (1) the change in the dose sensitivity of quartz with different pre-dose at different annealing temperatures; (2) the choice of the optimal annealing temperature to restore the quartz dose sensitivity to its original level ; (3) the sensitivity of quartz at 500 ° C for 8 h annealing temperature changes with the annealing time; (4) the sensitivity of the quartz after annealing at 700 ° C for 3 hours returned to its original value Horizontal possibilities. The results show that at 700 ℃, 3 hours of annealing conditions, can make the smallest change in the dose sensitivity of quartz, and almost restored its original level.