论文部分内容阅读
中心电站3号机组的ΤΓΜΠ-114型锅炉,在安装了对冲布置的燃烧重油的新燃烧设备后,对第一炉体进行了研究。由ΤΚ3按ΤΚ3-СКБВТИ图纸制造的新燃烧设备在二个炉体上都安装了。三流道燃烧器对冲布置于炉膛前后墙上,每层三只。它们离侧墙2310毫米,离炉底2550毫米,燃烧器之间的中心距为3000毫米。为了保证重油稳定和及早的着火,空气在第一流道中通过轴向叶片装置而旋转;在中间及外层流道中空气不旋转。关闭外层流道可以提高调节范围。此时,另外二个流道中的气游速度提高,
The ΓΓΠΠ-114 boiler at Unit 3 of the Central Power Station, after installation of a new combustion facility for heavy fuel oil with a hedge arrangement, conducted a study of the first furnace. New combustion equipment, made from ΤΚ3 ΤΚ3-СКБВТИ drawings, was installed on both furnaces. Three runner burner hedges placed in the furnace before and after the wall, three per floor. They are 2310 mm from the side wall, 2550 mm from the bottom of the furnace, and the center distance between the burners is 3000 mm. In order to ensure stable heavy oil and early fire, the air in the first runner through the axial vane device rotation; in the middle and outer runner air does not rotate. Close the outer runner can improve the adjustment range. At this point, the other two runners in the air speed increased,