制备高比表面多孔Ti-Si复合氧化物材料的新方法

来源 :高等学校化学学报 | 被引量 : 0次 | 上传用户:guannipishiwori
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A new method named peptizinggelation method was used to synthesize TiSi dioxide composite, whose surface area is above 1 000 m2/g. The character of this method is that Ti exists in the form of ion and ion cluster during the hydrolysis of Si(OC 2H 5) 4 . This is the progress on the cohydrolysis of Si(OC 2H 5) 4 and Ti(OC 4H 9) 4. During the calcination of gelation, Ti—O—Si was formed with Ti element in the situation of SiO 2 crystal cell. This is confirmed by FTIR analysis. TiSi dioxide composite with Ti molar fraction of 13.1% is mainly in the form of amorphous based on XRD analysis, which reveals that TiSi dioxide composite is uniform in structure. Furthermore, extra Ti element presents on the surface layer of TiSi dioxide composite examined by Raman and EES analysis. Owning to these two characters, TiSi dioxide composite prepared by peptizinggelation method becomes a good catalyst in the field of catalysis. A new method named peptizinggelation method was used to synthesize TiSi dioxide composite, whose surface area is above 1 000 m2 / g. The character of this method is that Ti exists in the form of ion and ion cluster during the hydrolysis of Si (OC 2H 5) 4. This is the progress on the cohydrolysis of Si (OC 2H 5) 4 and Ti (OC 4H 9) 4. During the calcination of gelation, Ti-O-Si was formed with Ti element in the situation of SiO 2 TiSi dioxide composite with Ti molar fraction of 13.1% is mainly in the form of amorphous based on XRD analysis, which reveals that TiSi dioxide composite is uniform in structure. the surface layer of TiSi dioxide composite examined by Raman and EES analysis. Owning to these two characters, TiSi dioxide composite prepared by peptizinggelation method becomes a good catalyst in the field of catalysis.
其他文献
文学类通识课程教学必须对传统的教学模式进行改革,必须牢牢抓住课堂教学这个中心环节,探索出适应学生需要的课堂教学模式.将“精讲-交流-实践”三步骤贯穿于文学类通识教育
翻转课堂教学模式是一种创新型的教学模式,它是建立在学生自主性学习的基础之上.本论文以Fibonacci数列为例,指出如何高效运作翻转课堂,从而有效地提高大学生学习的自主性.
提出了制备活性炭的“催化-氧化理论”,并开发了一种具有“催化-氧化”性能的新型催化剂,主要由硝酸盐、含钾化合物和助催化剂混合而成.在炭化和活化过程中,催化剂分解生成氧气
研究了Sr、Na在Al-Si熔体中的氧化动力学,应用原子杂化轨道理论分析了Sr、Na与Al-Si熔体的作用机理.研究结果表明,Sr比Na具有更长的变质有效期,其原因是Sr比Na具有更加稳定的
用自行设计的“连续抽运-探测光+脉冲抽运光”的实验系统,在不同波长的连续和脉冲光作用下,研究了细菌视紫红质(BR)膜的瞬态光吸收性质,并着重以632.8 nm的激光为连续抽运-
采用虚拟接触载荷法真实模拟半圆柱体与带有氧化层的平板之间的接触现象,研究了接触表面、表层及基体内部的弹塑性应力分布特征.研究发现,材料的变形刚度、屈服强度及表面摩
利用多弧离子镀方法 ,在HSS钢基体上沉积了TiAlN/Ti多元复合涂层 ,通过AES、XTEM以及EDS等手段 ,研究了涂层的界面结构 .结果表明 ,在TiAlN -Ti界面、Ti-HSS界面分别存在Ti2
研究了两种典型的光束几何配置下,LiNbO3:Fe晶体的光感应光散射.实验表明,晶体散射图样的几何结构相同,强度分布和偏振状态不同.在双光束作用下,以双光束为公共母线、以其交
采用蒙特卡罗模拟法研究非均匀电场中的放电参数.研究表明非均匀电场中的电子能量分布及电子参数不能达到当地电场的平衡值.在下降电场中,电子能量分布函数中的高能电子成分
本文基于第一作者1994年提出的D=2 SM阵列码的概念体系,进一步给出D=3SM阵列码的编码规则和存在条件,并讨论其结构特点、构造步骤和设计分析.最后指出其编码性能和用途.