【摘 要】
:
To establish the relationship between the static viscoelastic and the tribological properties,creep and friction experimentswere performed on PP-EPDM,PP-GF3
【机 构】
:
Changan Auto R&D Center,Changan Automobile Co,Ltd
论文部分内容阅读
To establish the relationship between the static viscoelastic and the tribological properties,creep and friction experimentswere performed on PP-EPDM,PP-GF30 and ABS through a UMT-Ⅱ multi-functional micro-friction test machine.Results showed thatPP-EPDM has the smallest creep rate and the better dimensional stability.This was related to the more complicated internal net structure,and the local slip and diffusion were more difficult than PP-GF30 and ABS under load.The Simulation Study of Burgers model foundedthat the viscosity coefficients of PP-EPDM was the smallest and the stiffness coefficient was the biggest,which exhibited a more apparentviscosity performance.The friction coefficient and wear depth of PP-EPDM were smaller than those of PP-GF30 and ABS,therefore,it has better wear resistance.Higher viscosity performance is favourable for friction coefficient improvement,and this goes againstimproving the wear resistance.Under the same conditions,PP-EPDM will be a better choice.
其他文献
商用车车架刚度、模态作为重要的设计目标直接影响整车性能.轴距、横纵梁板厚是影响车架刚度、模态的重要参数.本文以某商用车车架轴距、板厚为设计参数,基于Isight仿真平台,
In order to study damping characteristic and its influencing factors of E glass fiber/polyurethane composite leaf spring,we use finite element simulation me
采用聚乙烯-甲基丙烯酸缩水甘油酯(EGMA)作为增容剂,通过反应增容技术制备了聚对苯二甲酸丁二醇酯(PBT)的合金.通过试验确定了PBT合金汽车保险杠新材料的最佳配方,提高合金的
Based on finite element analysis and structural optimization methods,light-weight design of low control arm for multilink suspension were carried out.Finite
通过对凸焊参数中的焊接压力、焊接电流及焊接时间进行正交试验,优选出某车型高强度钢板上的M8螺母凸焊工艺焊接参数,提供一种新的高强度钢板凸焊螺母的焊接参数设计方法,宏
白车身结构轻量化设计需要满足多项设计需求,例如:车身全局弯曲刚度/模态、扭转刚度/模态、NTF、VTF等.CAE技术由于其高精度仿真分析能力被越来越多地应用于车身各项属性分析
Based on the classical laminate theory,the stacking structure and its joining structure of a carbon fiber composite drive shaft are designed with the carbon
本文介绍了常用的行李箱地毯骨架材料,并结合项目开发经验给出行李箱地毯骨架材料设计过程中主要考虑的要素,并针对PP蜂窝板和PHC给出了建议方案.
The solution treatment of three different components of Fe-Mn-Al-Si light steel after cold rolling are carried out at 1050℃ and the time is 1h,30min,10min.
本文针对基于摄像头的车辆前方行人检测问题,提出了一种融合特征,即积分通道特征来描述行人的方法;并利用AdaBoost算法训练得到了一个识别准确率为91.3%的行人检测器.同时针对