Effect of Solution Treatment on Structure and Mechanical Properties of Fe-Mn-Al-Si Light Steel After

来源 :2016中国汽车工程学会年会 | 被引量 : 0次 | 上传用户:lwp2007sh
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The solution treatment of three different components of Fe-Mn-Al-Si light steel after cold rolling are carried out at 1050℃ and the time is 1h,30min,10min.The microstructure and mechanical properties of steel is investigated by using optical microscopy,drawing machine,XRD and SEM.Results shows that with the increasing of heat treatment time,the tensile strength of No.1 and No.2 reduces and the elongation of No.1 and No.2 firstly increases after an initial decrease; the tensile strength and elongation of No.3 decreases with the heat treatment time increasing.The microstructure of three different components of steels are always austenite + ferrite and the content of retained austenite increases with the heat treatment time increasing.There is no phase transformation and Transformation Induced Plasticity occurs during the deformation of the tested steel.
其他文献
应用碳纤维增强复合材料(CFRP)是实现车身轻量化的重要途径,但是CFRP性能受成型工艺影响较大,不同成型工艺会导致CFRP性能参数产生明显差别,试验手段很难获得准确的用于CFRP
本文以某量产商用车仪表板为研究对象,选取仪表板总成中某个典型的部件为计算对象.该部件为无纤维填充的零件.采取了多种方法探索验证,首次使用了从试验样条到试验样件到分析
商用车车架刚度、模态作为重要的设计目标直接影响整车性能.轴距、横纵梁板厚是影响车架刚度、模态的重要参数.本文以某商用车车架轴距、板厚为设计参数,基于Isight仿真平台,
  In order to study damping characteristic and its influencing factors of E glass fiber/polyurethane composite leaf spring,we use finite element simulation me
会议
采用聚乙烯-甲基丙烯酸缩水甘油酯(EGMA)作为增容剂,通过反应增容技术制备了聚对苯二甲酸丁二醇酯(PBT)的合金.通过试验确定了PBT合金汽车保险杠新材料的最佳配方,提高合金的
  Based on finite element analysis and structural optimization methods,light-weight design of low control arm for multilink suspension were carried out.Finite
会议
通过对凸焊参数中的焊接压力、焊接电流及焊接时间进行正交试验,优选出某车型高强度钢板上的M8螺母凸焊工艺焊接参数,提供一种新的高强度钢板凸焊螺母的焊接参数设计方法,宏
白车身结构轻量化设计需要满足多项设计需求,例如:车身全局弯曲刚度/模态、扭转刚度/模态、NTF、VTF等.CAE技术由于其高精度仿真分析能力被越来越多地应用于车身各项属性分析
  Based on the classical laminate theory,the stacking structure and its joining structure of a carbon fiber composite drive shaft are designed with the carbon
会议
本文介绍了常用的行李箱地毯骨架材料,并结合项目开发经验给出行李箱地毯骨架材料设计过程中主要考虑的要素,并针对PP蜂窝板和PHC给出了建议方案.