搜索筛选:
搜索耗时0.7745秒,为你在为你在102,267,441篇论文里面共找到 1,000 篇相符的论文内容
类      型:
[学位论文] 作者:于爽, 来源:大连理工大学 年份:2013
本研究利用堆层粉末冶金技术制备了Al/Al-4%Cu梯度材料,为了进行对比,采用相同制备工艺制备了纯Al均匀材料、Al-4%Cu均匀材料。在该工艺下制备的Al/Al-4%Cu梯度热压毛坯件的...
[期刊论文] 作者:Amin Al Irobaidi, 来源:材料科学与化学工程(英文) 年份:2018
investigates the thermal behavior of Polyolefin containing Paraffin and Nano Hydrated aluminum silicate Al2Si2O5...
[期刊论文] 作者:赵春青,李多川, 来源:菌物学报 年份:2007
透明嗜热腐殖霉菌 图1,2Humicola hyalothermophila Moubasher,Mazen & Abdel-Hafez,Transactions of the British Mycological...
[期刊论文] 作者:Xin-yu Nie,Kang-ning Zhao,Hong-xiang Li,Qiang Du,Ji-shan Zhang,Lin-zhong Zhuang,, 来源:China Foundry 年份:2015
microstructure, interface thickness, element distribution and interfacial mechanical behavior of Ti-6Al...-4V/Al couples prepared by an insert moulding method...
[期刊论文] 作者:房玉荣,曹春海,许钦印,王林,张广涵,姚晓栋,许伟伟,孙国柱, 来源:低温与超导 年份:2013
研究了在高阻硅衬底上Al/AlOx/Al隧道结的制备技术,采用电子束蒸发制备Al/AlOx/Al三层材料,湿法刻蚀制备底电极和上电极以及电路连线,PECVD法生长绝缘层(SiO2)保护超导隧道结,RIE...
[期刊论文] 作者:刘兴海,张焜禹,董丽,卫爱丽,, 来源:材料导报 年份:2014
采用一道次热轧法制备镁铝复合板,研究了轧制温度、压下量、退火温度与时间对Al-Mg-Al复合板抗拉强度的影响规律。结果表明,Al-Mg-Al板的抗拉强度随轧制温度的升高先增大后减...
[期刊论文] 作者:Hamid Ashrafi,Mohammad Hosein Enayati,Rahmatollah Emadi,, 来源:Acta Metallurgica Sinica(English Letters) 年份:2015
Tribological behavior of nanostructured pure Al and AlAl12(Fe,V)3Si alloys containing 27(FVS0812) and...37(FVS1212) vol% of Al12(Fe,V)3Si precipitates was inves...
[期刊论文] 作者:Yuan Hua,Ma Zongshi(翻译), 来源:现代国际关系:英文版 年份:2008
Three major events are responsible for the rampancy today of Al Qaedaism,the doctrine of Al Qaeda,an...
[期刊论文] 作者:Yuan Hua, 来源:现代国际关系(英文版) 年份:2008
Three major events are responsible for the rampancy today of Al Qaedaism, the doctrine of Al Qaeda, an...
[期刊论文] 作者:Ji-xiao Wang,Gui-xian Wang,Jin, 来源:矿物冶金与材料学报:英文版 年份:2016
Ni–Al powder and Ni–Al composite coatings were fabricated by twin-wire arc spraying(TWAS)....The microstructures of Ni-5wt%Al powder and Ni-20wt%Al powder were ch...
[期刊论文] 作者:Levent Cenk Kumruoglu,Fatih Us, 来源:工程(英文)(1947-3931) 年份:2011
Micro arc oxidation of wire arc sprayed Al-Mg6, Al-Si12 and Pure Al coatings on low carbon steel has...
[期刊论文] 作者:徐天宁,卢忠,隋成华,吴惠桢, 来源:发光学报 年份:2013
利用物理气相沉积设备制备了Al/ZnO∶Al薄膜样品,研究了该薄膜结构的发光特性。结果表明,在ZnO∶Al薄膜表面镀一层Al岛薄膜可以增强其带边荧光,同时在475 nm附近产生蓝光峰。...
[期刊论文] 作者:许志武,闫久春,孔祥利,杨士勤,, 来源:Transactions of Nonferrous Metals Society of China 年份:2005
Interactions between Zn-Al alloy and Al_2O_ 3p/6061Al composite with the aid of ultrasonic vibration...
[期刊论文] 作者:黄志伟,赵宇辉,侯华,赵宇宏,牛晓峰,韩培德,, 来源:Journal of Central South University 年份:2012
Structural stabilities, thermodynamics stabilities, elastic properties and electronic structures of Mg17Al12..., Al2Y and Al4Ba phases were analyzed by first-princ...
[期刊论文] 作者:李国芳,王顺花,石宗利, 来源:有色金属 年份:2008
(Ti,Al)N是在TiN基础上发展起来的一种多元膜,目前Al元素对(Ti,Al)N膜的性能影响研究较多,但是不够系统,而且存在一些矛盾之处。...综述了Al元素在(Ti,Al)N膜中的作用机理和Al铝含量对(Ti,Al)N...
[期刊论文] 作者:, 来源:Journal of Materials Science & Technology 年份:2001
Al/Al203 composites of different ratios were hot-press sintered at 575~640℃ under a pressure...
[会议论文] 作者:邹贵生,吴爱萍,任家烈,彭真山, 来源:第九次全国焊接会议 年份:1999
Al-Ti和Al-Zr合金成功地在大气中连接了SiN陶瓷。...结果表明,适当加压能防止Al-Ti和Al-Zr合金的氧化;连接时间、连接温度和合金中的Ti、Zr含量明显影响接头强度;用Al-Ti和Al-Zr合金连接SiN陶瓷时,Al和Ti或Al和Zr同时与SiN陶瓷反应形成界面反应层...
[期刊论文] 作者:姜传海,吴建生,王德尊, 来源:Transactions of Nonferrous Metals Society of China 年份:2001
The application of compound parts of Al [AlBO] w/Al not only reduces the cost of the parts but also...
[期刊论文] 作者:李婷婷,彭超群,王日初,王小锋,刘兵,王志勇,, 来源:中国有色金属学报 年份:2011
总结Fe-Al、Ti-Al、Ni-Al 3大系金属间化合物的物相结构和基本特性,论述Fe-Al、Ti-Al和Ni-Al 3大类金属间化合物多孔材料的制备方法、孔结构表征以及耐腐蚀性能,并指出孔结构...
[会议论文] 作者:徐天宁,卢忠,隋成华,吴惠桢, 来源:第十七届全国化合物半导体材料微波器件和光电器件学术会议 年份:2012
利用物理气相沉积设备制备了Al/ZnO∶Al薄膜结构,研究了该结构的发光特性。结果表明,在ZnO:Al薄膜表面镀一层Al岛薄膜可以增强其带边荧光,同时在475 nm附近产生蓝光峰。...通过在Al岛薄膜和ZnO∶Al薄膜之间引入一层5nm的Ta205绝缘层可以使ZnO∶Al薄膜的带边荧光和蓝光显著增强,并随着Ta2.05绝缘层厚度的增大而减弱。...而且,通过对Al/ZnO:Al样品进行退火处理可以使蓝光峰增...
相关搜索: