论文部分内容阅读
转向离合器操纵机构的调整转向离合器的操纵是通过油压操纵器进行的,为了使这机构正常工作,调整后转向离合器操纵杆端的自由行程(由最前位置到开始连接位置)应为135—165公厘。使用过程中摩擦片磨损使自由行程逐渐减少,但最少不得少于75公厘。操纵杆端自由行程的调整得按下列顺序进行。1.从转向离合器室后部打开检视口。2.经过检视口,松开调整轴的固紧螺帽,旋转
Steering clutch operating mechanism adjustment Steering steering clutch is carried out by the hydraulic manipulator, in order to make this mechanism work properly adjusted steering clutch lever free stroke (from the front position to the starting connection position) should be 135-165 PCT Friction plate wear during use to gradually reduce the free path, but at least not less than 75 mm. Joystick-side free travel adjustment in the following order. 1. Open the view port from the rear of the steering clutch chamber. 2. Through the viewport, loosen the adjusting nut of the adjusting shaft and rotate it