在烧结生产过程中,由于具有连续性强、温度高、负荷重、物料硬度大等特点,使烧结设备在极端繁重和恶劣的条件下工作,磨损特别严重。普通钢板磨损速度为1.0厘米/日。每年要消耗大量的钢材,耗费不少的检修费用。为了改变这种不正常的状况,我们在部份烧结设备上推广使用了SFD-12型耐磨堆焊焊条,延长设备寿命,取得了较好的效果。 In the sintering process, due to the characteristics of strong continuity, high temperature, heavy load and material hardness, the sintering equipment works under extremely heavy and harsh conditions, and the wear is particularly serious. Ordinary steel wear rate of 1.0 cm / day. Each year to consume a large amount of steel, cost a lot of maintenance costs. In order to change this abnormal situation, we promote the use of SFD-12 wear-resistant surfacing electrode on some sintering equipment to prolong the service life of equipment and achieve good results.