使用特点: 1.此组合刀具把两把斜面车刀和一把端面车刀,中心钻和钻头都组合在一个刀体上; 2.两个斜面、大直径、台阶和端面可一次进刀车成; 3.内孔可先用装在刀体上的中心钻钻定位孔,再用钻头钻孔,同心度好。 4.由于一次车成,不必转动刀台,尺寸准确。 5.由于切断刀杆上装有工件长短定位器,尺寸准确,不必停车测量。 6.切断刀采用枪栓式安装在刀体上,能伸能缩,轻便灵活,不浪费材料,切断稳定,效果良好。 Features: 1. The combination of tools to two bevel lathe tools and a face turning tool, the center drill and the drill are combined in a knife body; 2. Two bevels, large diameter, step and face can be an infeed car Into the hole can be installed on the center of the cutter body first drilling positioning hole, and then drill bit, concentricity good. 4. As a car into, do not have to turn the knife, the size is accurate. 5 due to cut off the length of the arbor equipped with the workpiece positioner, the size is accurate, do not have to stop measuring. 6. Cutter bolt mounted on the knife body, can stretch shrinkable, lightweight and flexible, do not waste material, cut off the stability, the effect is good.