文章首先分析了多晶金刚石工具磨削修整的现状。多晶金刚石工具的修磨是用金刚石砂轮在磨床上进行的。而金刚石砂轮先被目前常用的不连续修整法修锐,然后再用于磨削,因此磨削、修锐工艺增多。由于多晶金刚石工具的硬度高,耐磨性好,使砂轮磨粒的寿命明显缩短。频繁的修整周期,带来了多晶金刚石磨削费用的提高、非生产时间的增加。因此, The article first analyzes the status quo of grinding and dressing polycrystalline diamond tools. Polycrystalline diamond tool grinding is carried out with a diamond grinding wheel on the grinder. The diamond grinding wheel is currently used by the current non-continuous dressing method sharpening, and then used for grinding, grinding, sharpening process increased. As polycrystalline diamond tools, high hardness, good wear resistance, the abrasive wheel life significantly shorter. Frequent dressing cycle, bringing the cost of polycrystalline diamond grinding increased, non-production time increases. therefore,