【摘 要】
：
In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity of environment air of the heading face is also decreased. First, according to the coeffic
【机 构】
：
School of Energy and Safety Engineering, Hunan University of Science and Technology, Xiangtan 411201
论文部分内容阅读
In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity of environment air of the heading face is also decreased. First, according to the coefficient of performance of dehumidifier, the capacity of dehumidification was calculated. Second, in the engineering example of the heading face, quantitative changes of WBGT (Wet Bulb Globe Temperature) were compared between with dehumidification and without dehumidification. Based on WBGT standards, the thermal comfort of high-temperature environment of heading face was evaluated between with dehumidification and without handling. Reducing the relative humidity of airflow through dehumidification, the thermal comfort of a high-temperature environment of heading face can improve greatly. Even if dry bulb temperature of airflow is not decreased, the thermal comfort of heading face environment is also improved to some extent.
其他文献
Targeting at the coal seam with useful value discarded above goafs, attempted to explore the feasibility of “mining technique in the condition of floor failure” from theoretical point of view, and predicted. It indicated that mining technique in the condi
According to the different engineering mechanical states of top coal caving and normal stoping of gaseous loose thick coal seams, the dialectical relation between this caving method and dynamic disasters was analyzed by simulating the change of stress sta
Gas drainage in Jincheng Mining Group Co., Ltd. was introduced briefly and the importance of gas drainage in gas control was analyzed. Combined with coal-bed gas oc-currence and gas emission, the double system of gas drainage was optimized and a pro-gress
Taking the Xinhe mine\'s structure, mine pressure, structural fissure, fault and fault displacement, the distance between fault and water inrush point, thickness of block,water pressure those geological factors which influenced the water inrush as the i
Based on the movement regularity of surrounding rock with road-in packing of gob-side entry retaining in fully-mechanized sub-level caving face (RPGERFCF), the me-chanical model of its surrounding rock was established and the calculating formulas of the d
Focused upon the dynamic changing regularity and tendency of overburden movement and bed separation developing during the strip mining and stoping under rail-ways were simulated by ANSYS model. The results show that movement and rheology developing of key
As a good method to solve the problem of high methane on the workface and in the goaf, drawing coal strata methane through a surface borehole is used. However, the excavation affected the overlying rock strata greatly. When the excavation face passed thro