论文部分内容阅读
Modeling and simulation of a high-frequency micro-pump based on giant magnetostrictive material (GMM
【机 构】
：
Department of Mechanical Engineering,Anhui University of Science and Technology,Huainan 232001,China
【出 处】
：
煤炭学报（英文版）
【发表日期】
：
2010年2期
其他文献
Mine gas extraction in China is difficult due to the characteristics such as mi-cro-porosity, low-permeability and high adsorption of coal seams. The pulsed mechanism of a high-pressure pulsed water jet was studied through theoretical analysis, experiment
The integrated monitoring system for running parameters of key mining equipment based on condition m
Statistic constitutive equation of top-coal damage for fully mechanized coal face with sublevel cavi
Under the action of abutment pressure in front of fully mechanized coal face with sublevel caving (CFSC), top-coal over CFSC deformed. In the process of whole de-formation of top-coal, it changed from continuum elastic mass to non-continuum plastic mass c
The main projects and development status of noise forecasting and controlling on working face in coa
Effectiveness analysis of methane-drainage by deep-hole controlled pre-splitting blasting for preven
In the study of the application effectiveness of deep-hole controlled pre-splitting blasting technology, it was found through laboratory micro test and field study on a mine in south China that under the technology, coal masses produce many irreversible c
Based on the theory of nonlinear dynamic finite element, the control equation of coal and water jet was acquired in the coal breaking process under a water jet. The calcu-lation model of coal breaking under a water jet was established; the fluid-structure
The impact trend of rock-coal system was studied by the method of accumulat-ing and releasing of deformation energy and interaction of rock-coal system. The system model of roof-coal-floor was established. Based on the RFPA software, rock fracture process
Combined with the experimental results from the large tunnel of the Chongqing Research Institute, the mechanism of gas and coal dust explosion was studied. Some concepts about gas and coal dust explosion were introduced such as the form condition and infl
Numerical simulation and experiment analysis of improving permeability by deep-hole presplitting exp
Created a new damage model for explosive for LS-DYNA3D, taking advantage of the Taylor method aimed at the high gassy and low permeability coal seam, and nu-merically simulated and analyzed the deep-hole presplitting explosion. The entire process of explo