论文部分内容阅读
一、蛙池建造要选择安静、荫湿、水源排灌方便的地方建池。池子为长方形或正方形的水泥红砖结构。池壁高1.2—1.3m(池壁下部25—30cm用水泥砖,上部可用其他防逃设施代替、以降低造价),面积为3—5m~2,灌水25cm左右。池中央设正方形饵料台兼栖息台,用木框架钉上塑料纱窗作成,其大小约占池子的1/3或1/4,饵料台浮于水面,饵料投在纱窗上。池子上方如无树荫,则要搭凉棚,防阳光直晒。池底一角最低处设排水孔,其余三角都比排水孔高8—5cm,逐渐如排水孔倾斜,便于清池换水。进水孔设在排水孔的对角,便于冲洗,进出水口都要用纱窗封口防逃。
First, the construction of the frog pool to choose a quiet, wet, water irrigation and drainage convenient place to build the pool. The pool is a rectangular or square cement red brick structure. Pool wall height 1.2-1.3m (lower part of the pool wall 25-30cm with cement brick, the upper part of other anti-escaping facilities can be replaced, to reduce costs), an area of 3-5m ~ 2, irrigation 25cm. The center of the pond is equipped with a square bait station and a perch, which is made of a wooden window with a plastic screen. The size occupies 1/3 or 1/4 of that of the pond, and the bait station floats on the surface of the screen. If no shade above the pond, you have to take the pergola, prevent direct sunlight. The lowest corner of the bottom of the pool set drainage holes, the remaining triangular high than the drainage hole 8-5cm, gradually drain holes tilt, easy to change pool water. Water inlet hole located in the diagonal of the drainage hole for easy washing, access to the water outlet should be sealed with anti-escape screen.