Galvanic Effect Between Galvanized Steel and Carbon Fiber Reinforced Polymers

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:yjxff520
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The galvanic corrosion behavior of carbon fiber reinforced polymers (CFRPs) GM-CFRP and Tepex-CFRP in contact with a Zn-coated DP590 steel in solution containing 0.9 wt% NaCl + 0.1 wt% CaCl2 + 0.075 wt% NaHCO3 was investigated.The results showed that the GM-CFRP/steel couple was initially more resistant to galvanic corrosion,but its galvanic corrosion activity gradually became higher than the Tepex-CFRP/steel couple.The different galvanic behaviors of these two couples were discussed based on the electrochemical performance of GM-CFRP,Tepex-CFRP and DP590 coupons in the testing solution.
其他文献
The influence of Nb content on the microstructure and cryogenic mechanical properties of a 7%Ni steel was investigated within the Nb content range from 0 to 0.05%. The microstructure was characterized by optical microscope, scanning electron microscope, t
The effect of open porosity of Y2O3 ceramic on the apparent contact angle and interaction between molten Ti47Al alloy and Y2O3 ceramic substrates under pure Ar was investigated by using a sessile drop method at 1600 ℃.As the open porosity increased from 9
Carbon dioxide mineral sequestration with steelmaking slag is a promising method for reducing carbon dioxide in a large-scale setting.Existing calcium oxide or calcium hydroxide in steelmaking slag can be easily leached by water,and the formed calcium car
Wear behaviors of 3Cr2W8V and GH4169 with H70, including surface property, wear performance and friction work, were investigated. 3Cr2W8V and H70 friction pair suffered severer wear and surface damage than GH4169 and H70 friction pair. The wear process ha
The synthetic effects of frequency and duty ratio on growth characteristics and corrosion properties of coating on Ti6Al4V fabricated by microarc oxidation are investigated comprehensively.Under the condition of uniform cumulating time of positive impulse
Precipitation behavior of (Ti,V,Mo)C and microstructural evolution of the ferritic Ti-V-Mo complex microalloyed steel were investigated through changing coiling temperature (CT). It is demonstrated that the strength of the Ti-V-Mo microalloyed steel can b
The corrosion behavior of Al-5 at.% Cr,Al-5 at.% Si,Al-5 at.% Mo and Al-5 at.% Ti produced via casting and Al-5 at.% Cr produced by high-energy ball milling and subsequent consolidation by cold pressing was studied using potentiodynamic polarization and s
Corrosion performance of carbon steel in CO2 aqueous environment containing silty sand with different sizes was investigated by immersion tests and electrochemical measurements.Silty sand could form an adsorption layer on steel surface in initial period,a