论文部分内容阅读
为解决长距离高温物料输送机的槽体折弯,我厂自行设计了一套简易槽体折弯装置,简要介绍如下:1.工装原理利用千斤顶5把外力传递给上座架8、上座架8通过筋板把力传到上轧辊9上,工件10在上轧辊9和下轧辊12的共同作用下折弯变形。根据需要调节上轧辊9下移的距离和定位块11的位置。即可得到不同尺寸和形状的折弯工件。2.工装结构及使用方法如附图所示:它是由下座架1、下轧辊12、上轧辊9、上座架8、站架2、横梁6、滑块3、定位块11、千斤顶
In order to solve the long-distance high-temperature material conveyor tank bending, I designed a simple tank body bending device, a brief introduction is as follows: 1 tooling principle using jack 5 external force transmitted to the upper frame 8, the upper frame 8 The force is transmitted to the upper roller 9 by the ribs, and the workpiece 10 is bent and deformed under the action of the upper roller 9 and the lower roller 12. The distance by which the upper roll 9 is lowered and the position of the positioning block 11 are adjusted as necessary. You can get different size and shape of the bending workpiece. 2. Tooling structure and the use of methods as shown in the figure: It is composed of the lower frame 1, the lower roll 12, the roll 9, the upper frame 8, stand 2, beam 6, slider 3, positioning block 11, jack