Superparamagnetic CoFe2O4@Au with High Specific Absorption Rate and Intrinsic Loss Power for Magneti

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:white2008
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
CoFe2O4 nanoparticles (NPs) and surface modified with gold (Au) have been synthesized by a thermal decomposition method.The obtained NPs and formation of CoFe2O4@Au core-shell (CS) were confirmed by characterizing their structural and optical properties using X-ray powder diffraction (XRD) patterns,Fourier transform infrared spectroscopy,Raman spectroscopy,UV-Visible and photoluminescence studies.Morphological and compositional studies were carried out using high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy,while the magnetic properties were determined using alternating gradient magnetometer and Mossbauer to define the magneto-structural effects of shell formation on the core NPs.Induction heating properties of CoFe2O4 and CoFe2O4@Au CS magnetic nanoparticles (MNPs) have been investigated and correlated with magneto-structural properties.Specific absorption rate and intrinsic loss power were calculated for these MNPs within the human tolerable range of frequency and amplitude,suggesting their potential in magnetic fluid hyperthermia therapy for possible cancer treatment.
其他文献
The Mg MB26/Al 7075 composite rod,in which Mg MB26 serves as the sleeve and Al 7075 serves as the core,is fabricated via the process of co-extrusion.The influence of extrusion speed on the microstructure evolution,interface bonding and mechanical response
Aiming at the requirements of structural steel in Gen-IV nuclear reactor,the high-chromium martensitic heat-resistant steels containing 10-12% chromium were developed.The toughness of heat-affected zones (HAZs) is one of the important factors for evaluati
In the present study,the weld formation and mechanical properties of the AA-5A06 friction pull plug welded (FPPW) joints were improved by controlling the axial force history.Several defect-free FPPW joints were made successfully by using the welding param
A 17 vol% SiCp/Al-Mg-Si-Cu composite plate with a thickness of 3 mm was successfully friction stir welded (FSWed) at a very high welding speed of 2000 mm/min for the first time.Microstructural observation indicated that the coarsening of the precipitates
In the present experimental investigation,Al-3 wt%Cu and A1-3 wt%Cu-0.5 wt%Mg alloys castings are produced by a horizontal solidification technique with a view to examining the interrelationship among growth rate (GR),cooling rate (CR),secondary dendrite
In this study,near fully dense (96.5%) pure tungsten bulks were additively manufactured and the cracking behavior was investigated.A crack network with a spacing of ~ 100 μm was observed in the fabricated bulks.It was observed that the laser scanning stra
Fe-10 at.%Cr alloy was implanted with hydrogen ions at room temperature,followed by annealing at high temperatures.The annealing process made the defects develop into large dislocation loops.The nature of the dislocation loops formed after annealing was s
The work is mainly to study the thermal stability including the phase stability,microstructure and tribo-mechanical properties of the A1B2-type WB2 and W-B-N (5.6 at.% N) films annealed in vacuum at various temperatures,which are deposited on Si and GY8 s
The dynamic mechanical relaxation behavior of Ti36.2Zr30.3Cu8.3Fe4Be21.2 bulk metallic glass with good glass-forming ability was investigated by mechanical spectroscopy.The mechanical relaxation behavior was analyzed in the framework of quasi-point defect