陶器是考古学家所面对的最丰富的古代遗物之一,对其制作工艺流程的观察与分析更是古代陶器研究的重要组成部分。本文意图在介绍中国古代陶器制作技术已有研究成果的基础上,通过对相关民族学、考古学资料的梳理,为中国古代可能存在的“泥条拉坯成型技术”(见下文讨论)提供相应的信息支撑。迄今为止,考古学上所能识别的陶器生产工艺流程包括原料制备、坯体成型、修整、装饰、烧制等环节。除此之外,民族志资料表明,陶器坯体在操作台成型之后至入窑烧制之前的生产过程中,还会经历至少数次搬运以及稍长时间的阴干等工序。坯 Pottery is one of the richest ancient relics confronted by archeologists. The observation and analysis of its production process is an important part of ancient pottery research. This article intends to introduce the ancient Chinese pottery production technology has been based on the research results, through the relevant ethnology, archeology data for the Chinese ancient may exist “Caster Billet molding technology ” (see below) Provide the appropriate information support. So far, the archeology of pottery production process can be identified, including raw material preparation, body forming, dressing, decoration, firing and other sectors. In addition, ethnographic data indicates that the pottery body undergoes at least several passes and slightly longer periods of time, such as drying, after the molding of the worktop to the pre-kiln firing process. Billet