腔镜失调对激光陀螺信号输出的影响

来源 :光子学报 | 被引量 : 0次 | 上传用户:jchangmafco
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
研究了不同腔镜结构不同失调情况对空间谐振式激光陀螺中光束空间位置的影响.利用Collins积分与Collins程函理论以及MATLAB软件工具,对腔镜失调前后激光陀螺中光束传输进行了仿真计算.结果表明,相同失调量的不同反射镜所产生的拍频频差是不同的,且分别从M1和M4镜探测到的拍信号频不相同;对于小增益激光器,使用球面镜的腔镜结构较平面镜的腔镜结构更易形成稳定光束空间位置分布;由所计算的空间坐标xn可以看出,双向行波光束的光斑中心发生了偏移,在一定的失调量下将会影响到激光陀螺的拍频输出.研究结果对激光陀螺的工程检测和腔镜调整有指导作用,有助于激光陀螺测量准确度的提高. The influence of different misalignments of different endoscopic structures on the beam spatial position in the cavity resonator laser gyroscope was studied.The beam transmission in the laser gyroscope before and after the endoscope misalignment was simulated by using Collins integral theory, Collins letter theory and MATLAB software tools. The results show that the beat errors produced by different mirrors with the same offset amount are different, and the beat signals detected by M1 and M4 mirrors are different from each other. For the small gain laser, the mirror structure using the spherical mirror is more flat than the mirror The structure of the endoscope is easier to form a stable spatial position distribution of the beam. From the calculated spatial coordinates xn, it can be seen that the center of the spot of the bi-directional traveling wave beam has been offset. Under a certain offset, the beat output of the laser gyro will be affected The research results are helpful to the engineering detection of laser gyroscope and the adjustment of endoscope, which is helpful to improve the measurement accuracy of laser gyroscope.
其他文献
基于位置和波长参量的并行复用,提出一种高加密容量的光学干涉多图像加密系统.加密时,待加密图像分为两组,每组均利用位置复用技术解析地加密到两个纯相位板中,将所获取的四个相
采用共混法以聚硅氧炕微球作为光散射剂,聚甲基丙烯酸甲酯为基材制备光散射材料.研究了聚硅氧烷微球的粒径与浓度对光散射材料总光透过率与扩散率的影响并与理论模拟值进行了
随着阵列波导光栅(Arrayed Waveguide Grating,AWG)型器件在光通信系统中的大规模应用,对低成本AWG芯片的需求越来越多.在各种降成本方案中,减小AWG芯片的尺寸是最有效的方法之
本文沿用拙文[1]中的有关概念,揭示圆内接闭折线垂心的两个有趣性质.
传统的应试教育主要表现为重结论、轻过程.它是一种“急功近利”走捷径的接受性教学,把形成结论的生动过程变成了单调刻板的条文背诵,留给学生的一切都是现成的.排斥了学生的思考
将色散测量方法和快速扫描延迟线技术相结合,在谱域光学相干层析系统中实现了对群延迟色散的精确补偿.在该方法中,先在样品臂中放入平面反射镜,等间隔移动参考臂中快速扫描延
用代数方法研究几何问题是解析几何的本质特征,很多解几题中的一些图形性质和“平几”知识相联系,因此,重视“平几”知识的应用,将使问题更迅速地迎刃而解.1充分发挥三角形,
期刊