论文部分内容阅读
当前的状况为切实解决我国木材和木材产品的供需矛盾,在《中共中央、国务院关于保护森林发展林业若干问题的决定》中,已明确指出:“要充分利用林区的采伐、加工和造材的剩余物,大力生产木片,开展小材小料加工,发展人造板生产。”近年来,东北林区的采伐、造材和加工剩余物的利用有了进一步发展。如黑龙江、吉林两省一九八○年利用“三剩”生产了纤维板25.7万立方米,刨花板1.8万立方米,比一九七七年分别增加0.6倍和3.3倍;黑龙江省一九八○年生产术片25万层积立方米,比一九七七年大约增加38%,估计今年的产量可达到40万层积立方米;还利用“三剩”发展了小材小料生产,为市场提供了急需的小木制品。黑龙江省一九八○年“三剩”利用率大约已由一九七七年前的20%,提高到25%左右,其中较高
The current situation in order to effectively solve the contradiction between supply and demand of timber and timber products in China, “the CPC Central Committee and the State Council on the protection of forest development forestry a number of issues,” has made it clear: “To make full use of forest harvesting, processing and building materials Of the remaining material, vigorously produce wood chips, small materials and small materials processing, the development of wood-based panel production. ”In recent years, the Northeast Forest harvesting, timber and processing residue utilization has been further developed. For example, in Heilongjiang and Jilin provinces, the “Three Leftovers” were used to produce 257,000 cubic meters of fibreboard and 18,000 cubic meters of particleboard in 1980, an increase of 0.6 times and 3.3 times respectively as compared with that in 1977; in Heilongjiang Province, Production of 25 million units per year cubic meters, an increase of about 38% over 1977, this year’s production is estimated to reach 40 million layer cubic meters; also use the “three left” to develop small pieces of small pieces of material production, as The market offers much-needed small wooden products. The utilization rate of “three leftover” in Heilongjiang Province in 1980 increased from about 20% before 1977 to about 25%, of which the higher