Composition Optimization of Nb-Ti Microalloyed High Strength Steel

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:mengqingwang
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Four Nb-Ti microalloyed steels were refined and rolled to study the composition optimization of Nb-Ti microalloyed steels.The effects of Nb and Ti on the microstructures,precipitates and properties of Nb-Ti microalloyed steel were investigated.The results showed that an increase in Ti content resulted in the appearance of many fine precipitates leading to a strong precipitation strengthening effect.Hence,the yield strength increased.Besides,the increased strength by the combined increase of Nb and Ti was similar to that observed for the increase in Ti content alone.This increase in strength was attributed widely to the increase in the Ti content alone rather than Nb.Moreover,the increase in Nb content beyond 0.036 wt% exerted no significant effect on the strength of Ti-Nb microalloyed steels,in which more Ti could be added to further improve the strength of steels.
其他文献
In order to obtain the suitable phase change material (PCM) with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric acid (LA) and stearic acid(SA) eutectic mi
To reveal the complicated mechanism of the multicomponent mass transfer during the growth of ternary compound semiconductors,a numerical model based on Maxwell-Stefan equations was developed to simulate the Bridgman growth of CdZnTe crystal.The Maxwell-St
A composite material (Fe3O4/Coke) using coke supported Fe3O4 magnetic nanoparticles was successfully prepared via an in-situ chemical oxidation precipitation method and characterized by SEM, XRD, Raman, and FTIR. The results showed that the Fe3O4 nanopart
ZnMn2O4 thin films were deposited by a sol-gel technique onto a p+-Si substrate, and a RRAM device with the Ag/ZnMn2O4/p+-Si structure was fabricated. The microstructure of ZnMn2O4 films and the resistive switching behavior of Ag/ZnMn2O4/p+-Si device were
By using the wastes fish skin of sturgeon processed as a raw material,a macromolecule biomaterial of collagen was extracted.Acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) were successfully isolated from the skin of hybrid sturgeon with two
Silver coatings on the exterior surface of monolithic activated carbon (MAC) with different morphology were prepared by directly immersing MAC into [Ag(NH3)2]NO3 solution. Acid and base treatments were employed to modify the surface oxygenic groups of MAC
Walnut-shell activated carbons (WSACs) were prepared by the KOH chemical activation. The effects of carbonization temperature, activation temperature, and ratio of KOH to chars on the pore development of WSACs were investigated. Fourier transform infrared
Palygorskite/paraffin phase-change composites were prepared by the combination of purified palygorskite clay and sliced paraffin. Then, this composite was used in the Trombe wall to improve its energy storage ability. Further, its energy storage ability w