Nanocrystalline Cu with average grain sizes ranging from ～ 24.4 to 131.3 nm were prepared by the electric brushplating technique.Nanoindentation tests were performed within a wide strain rate range,and the creep process of nanocrystalline Cu during the holding period and its relationship to dislocation and twin structures were examined.It was demonstrated that creep strain and creep strain rate are considerably significant for smaller grain sizes and higher loading strain rates,and are far higher than those predicted by the models of Cobble creep and grain boundary sliding.The analysis based on the calculations and experiments reveals that the significant creep deformation arises from the rapid absorption of high density dislocations stored in the loading regime.Our experiments imply that stored dislocations during loading are highly unstable and dislocation activity can proceed and lead to significant post-loading plasticity. Nanocrystalline Cu with average grain sizes ranging from ~ 24.4 to 131.3 nm were prepared by the electric brush plating technique. Nanoindentation tests were performed within a wide strain rate range, and the creep process of nanocrystalline Cu during the holding period and its relationship to dislocation and twin structures were examined that was quite significant for smaller grain sizes and higher loading strain rates, and are far higher than those predicted by the models of Cobble creep and grain boundary sliding. analysis based on the calculations and experiments reveals that the significant creep deformation arises from the rapid absorption of high density dislocations stored in the loading regime. Our experiments imply that stored dislocations during loading are highly unstable and dislocation activity can proceed and lead to significant post-loading plasticity.