论文部分内容阅读
The composite laminates with embedded acrylonitrile butadiene rubber(NBR) layer were fabricated by cocuring process.The embedded layers were perforated with a series of small holes to allow resin to flow through the damping layer and completely couple the structure to improve bending stiffness and interlaminar shearing strength of these cocured composite laminates.The damping,bending stiffness and shearing strength of these composite laminates with different perforation diameters were investigated.The experimental results show that increasing the perforation diameter leads to significant decreases in damping and significant increase in bending stiffness up to an area ratio of 7.065%.The area ratio here is defined as the ratio of perforation area to the total damping area.Beyond the area ratio of 7.065%,increasing the diameter to an area ratio of 50.24% results in only a slight variation in damping and bending stiffness.Moreover,increasing the perforation diameter does not always increase the shearing strength of the embedded viscoelastic layer.The shearing strength of embedded viscoelastic layer increases only when the area ratio is greater than 19.625%;instead,it will decrease.
The composite laminates with embedded acrylonitrile butadiene rubber (NBR) layers were fabricated by cocuring process. The embedded layers were perforated with a series of small holes to allow resin to flow through the damping layer and completely couple the structure to improve bending stiffness and interlaminar shearing strength of these cocured composite laminates. damping of bending stiffness and shearing strength of these composite laminates with different perforation diameters were investigated. the experimental results show that increasing the perforation diameter leads significant loss in damping and significant increase in bending stiffness up to an area ratio of 7.065%. the area ratio here is defined as the ratio of perforation area to the total damping area.Beyond the area ratio of 7.065%, increasing diameter to an area ratio of 50.24% results in only a slight variation in damping and bending stiffness. Moreover, increasing the perforation diameter does not always increa se the shearing strength of the embedded viscoelastic layer. The shearing strength of embedded viscoelastic layer increases only when the area ratio is greater than 19.625%; instead, it will decrease.