振动台焊合件是双块式轨枕振动台总成的关键部件.主要用于振捣轨枕混凝土,使密实度达到要求。设计要求振动台焊合件台面板的不平度小于0.5 mm,但原有的工艺方案很难保证这一要求。因此对原有工艺进行了如下改进。双块式轨抗振动台焊合件是一种内部有筋板的箱形结构,如图1所示。 Vibrating table weldment is the key component of the double-block sleeper vibration table assembly, which is mainly used to vibrate sleeper concrete to meet the requirements of compactness. Design Requirements Vibration table weldment Taiwan panel surface roughness is less than 0.5 mm, but the original process is difficult to guarantee this requirement. Therefore, the original process has been improved as follows. Dual-rail anti-vibration table weldment is a box-shaped structure with ribs, shown in Figure 1.