论文部分内容阅读
清扫机器打开机器各部位的检视孔盖,拆下所有的防护罩,清除滚筒室、过桥输送室内的残存杂物,清除小抖动板、清选室底壳、风扇蜗壳内外、变速箱外部、割台、驾驶台、发动机外表等部位残存的秸秆杂草和泥土杂物等。清扫完毕,启动机器,让各工作部件高速运转3-5分钟,排尽所有残存物。然后用水冲洗机器外部,再开动机器高速运转3-5分钟,以除去残存的水。
Sweep the machine to open the inspection hole covers of all parts of the machine, remove all the protective cover, clear the drum room, crossing the residual debris transportation room, clear the small jitter board, cleaning chamber bottom shell, inside and outside the fan case, gearbox exterior , Header, bridge, the engine surface and other parts of the remaining straw weeds and debris and other debris. After cleaning, start the machine, let the working parts run at high speed 3-5 minutes, exhaust all the remnants. Then rinse the outside of the machine with water, then turn on the machine for 3-5 minutes at high speed to remove the remaining water.