论文部分内容阅读
电脑刻绘系统是由微型计算机、扫描仪、刻字机(或雕刻机)及刻绘软件等组成。操作人员利用电脑进行设计,然后通过刻字机将所设计的文字和图表刻在即时贴(或反光膜等)上,用于广告、装潢、展厅布展等方面。当前刻字机及相应软件已相当成熟和完善。就刻字机的种类而言,有平板式、滚筒式,幅面由B5至A0,刻绘的精度最高已达0.003毫米,刻刀的速度可达20cm/s,压力最大为300g。刻绘软件所用的字模亦由原来的矢量字,改为用三次曲线描述,使其无论输出多大均不失真。用先进的电脑刻绘代替手工刻字,具有快速、准确、易于改动、可批量生产、能满足特殊要求等优点。目前国外现有的刻绘软件已经比较成熟,但因其主要是针对西文字体设计的,不适合中国人使用。而港台
Computer engraving system is composed of microcomputers, scanners, Kezi Ji (or engraving machine) and engraving software. Operators use computers to design, and then through the lettering machine design of the text and graphics engraved on sticky notes (or reflective film, etc.), for advertising, decoration, exhibition hall exhibition and so on. The current cutting plotter and the corresponding software has been quite mature and perfect. In terms of the type of cutting plotter, there are flat type, drum type, format from B5 to A0, engraving accuracy up to 0.003 mm, the speed of the knife up to 20cm / s, the maximum pressure of 300g. Characterization software used by the font from the original vector word, with the cubic curve description, so that no matter how much output are not distorted. Use advanced computer engraving instead of hand-lettering, with fast, accurate, easy to change, mass production, to meet the special requirements and so on. At present, the existing software for engraving in foreign countries is relatively mature, but it is not suitable for Chinese people because of its design mainly for western typefaces. Hong Kong and Taiwan