论文部分内容阅读
为了解决机修中零件的刻线问题,我们在X62铣床上利用分度盘进行刻度效果很好。一、安放位置分度头安放在x62铣床工作台面上合适的位置,这位置必须保证有进退走刀量的行程二、工作方法首先把滚轮10固定在铣床主轴专用刀杆6上、滚轮刀下垂零度与工件顶端定点,此时,要求主轴固定不动,工件偏差不准超0.002mm,以防止刻线偏移不正。横向床面
In order to solve the engraving machine parts scoring problem, we use the X62 milling scale graduation scale works well. First, the placement of indexing head placed in the x62 milling machine table top the appropriate position, this position must ensure that there is a distance of advance and retreat take the amount of two, the working method First of all, the roller 10 is fixed to the milling spindle spindle 6, roller knife sag Zero point and the top of the workpiece fixed point, this time, requiring fixed spindle, workpiece deviation is not allowed to exceed 0.002mm, in order to prevent the engraved offset is not correct. Lateral bed surface