【摘 要】
：
Under the mining influence, carried on the electron microscope, the thin section analysis and creep tests to the fault matter\'s original sample and five groups of duplication samples, which have three kinds of moisture. The results of those tests indic
【机 构】
：
Key Laboratory of Mine Disaster Prevention and Control, Shandong University of Science and Technolog
论文部分内容阅读
Under the mining influence, carried on the electron microscope, the thin section analysis and creep tests to the fault matter\'s original sample and five groups of duplication samples, which have three kinds of moisture. The results of those tests indicate that confining pressure effect, structure effect and moisture effect all have influence to fault matter\'s nature. Meanwhile, the distortion destruction and stability variation of fault crush zone are the main reason which causes water-inrush lag-effect. Simultaneously, the stimulation computation we made by the numerical simulation software FLAC 3D also describes the mining influence to floor strata, fault crush zone\'s range and size, the influence of confined water on overburden and the fault zones, also it describes the time effect of bearing influenced by confined water and the rock dank height of confined water along the fault zones influenced by the specific water head.
其他文献
Dispersed coal was analyzed and rock experiment was conducted on four coals of medium-low rank in the aspect of coal and rock configuration,which resulted in eight coal samples mostly of the vitrinoid group or inert group.Then,an adsorption experiment of
The intrinsic kinetic models of the Langmuir-Hinshelwood type were investi-gated in terms of the reaction rates of CO hydrogenation and CO2 hydrogenation in the form of reactant fugacity.The parameters were estimated by the Universal Global Optimi-zation
Presented a new analytical model for studying the shear-tensile large deformation behavior near the vicinity of joint interface for bolted rough discontinuous rock, and presented the formulation estimating global shear strength for bolted joints under she
As the traditional non-linear systems generally based on gradient descent optimization method have some shortage in the field of groundwater level prediction, the paper, according to structure, algorithm and shortcoming of the conventional radial basis fu
Thermal degradation processes and kinetics of composites based on ultrafine coal powder and high density polyethylene (HDPE), linear Iow density polyethylene (LLDPE) or Iow density polyethylene (LDPE) at different compositions were studied by means of the
Screening was widely used in many sectors of industry. However, it is rather incomplete to the cognition of the sieving process for us due to the daedal separation process involving interactions of thousands of particulates. To address this problem, two d
For the study on the relationship between the dynamic phenomena in the mining such as mine earthquakes,outburst and faults slide,firstly,double shear friction experiments of sandstone were made,and its slide criterion was suggested considering the viewing
The shallow groundwater in Shendong mining area was broken because of large-scale underground mining activities. Selecting 32201 working-face as research area,analyzed the change rule of groundwater level and aquifer thickness under mining impact with a l
To make assessment on its environmental security,fly ash samples were collected from the gangue power plant.Total content of heavy metals in sieved fly ash were analytically determined.We also carried out Tessier extractive experiments to check the chemic
Using research results on physical properties of primary coal and rock mass, in this paper, response characteristic function y(t), amplitude frequency characteristic H(ω)and phase-frequency characteristic ψ(ω) were used to describe dynamic response of str