A Micromorphic Elasto-plastic Model for granular materials

来源 :中国计算力学大会2018暨国际华人计算力学大会2018 | 被引量 : 0次 | 上传用户:bear81
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  This study proposes a micromorphic elasto-plastic continuum model for granular materials based on a micromechanics approach.In this model,a continuum material point is considered as a granular volume element whose deformation behavior is influenced by the translation and the rotation of particles.
其他文献
In order to study the interference between fractures influence on the law of fracture propagation during horizontal wells multi-cluster fracturing in shale gas reservoir,anisotropic damage subroutine
在土木工程中,FLAC3D 和ABAQUS 均是CAE 数值仿真软件,为研究两种软件在工程分析中的适用性,本文采用两种软件对开挖卸荷后的粘土公路边坡稳定性进行数值仿真分析。为保证结果的真实性、有效性,分析过程中均采用强度折减法计算边坡安全系数,同时对开挖边坡附近区域的点进行应力场和位移场的监测。
Determining the margin of safety and identifying the critical failure mechanism of gabion retaining walls is an important task in practice.Discontinuity layout optimization(DLO)is the revolutionary ge
Despite the convenience of tunnels for transportation in modern cities,ground movements induced by tunneling may cause pipeline deformations.One of the greatest challenges is the threat that lies in t
This paper investigates the influence of heterogeneity on mechanical and acoustic emission(AE)behaviors of stratified rock specimens under uniaxial compression using a digital image processing(DIP)bas
以西部典型土石混合料路堑开挖边坡为工程背景,针对特定开挖路堑边坡工点,设计开展大型三轴试验获得开挖工点边坡土体参数,比较分析不同本构模型对开挖边坡变形量及稳定性的影响,采用能够反映开挖施工过程及适用于土石混合料的修正双屈服面本构模型,研究边坡几何及物理因素对变形量的影响。
Couette shear is the shear of an object between two infinite planes.Compared with direct shear and simple shear test,in Couette shear test,there is no need to set an artificial shear band or boundary
围岩的稳定性分析是引水隧洞开挖过程中的重要研究课题。本文基于非达西渗流—应力耦合理论,讨论了完整岩体和破碎岩体隧洞在开挖过程中的渗流场和塑性区变化规律,及其非达西渗流惯性系数对渗流场特性的影响。进而基于强度折减法和超载法,分析了锦屏二级深埋引水隧洞在开挖支护过程中的稳定性问题。
Aiming at the problem that the safety factor calculated by conventional gravity increase method is larger than the strength reduction method,the modified gravity increase method is applied for slope s
Shale is a typical heterogeneous and anisotropic material whose properties are characterized primarily by locally oriented anisotropic clay minerals and naturally formed bedding planes.