关于FLAC3D和ABAQUS在边坡稳定性分析中的比较

来源 :中国计算力学大会2018暨国际华人计算力学大会2018 | 被引量 : 0次 | 上传用户：G00G01

【摘要】

：

在土木工程中,FLAC3D 和ABAQUS 均是CAE 数值仿真软件,为研究两种软件在工程分析中的适用性,本文采用两种软件对开挖卸荷后的粘土公路边坡稳定性进行数值仿真分析。为保证结果的真实性、有效性,分析过程中均采用强度折减法计算边坡安全系数,同时对开挖边坡附近区域的点进行应力场和位移场的监测。

【作者】

：

陶玲冯志强李吉祥周洋靖

【机构】

：

西南交通大学力学与工程学院,中国成都610031 巴黎埃夫里大学力学与热能实验室,法国萨克莱910

【出处】

：

中国计算力学大会2018暨国际华人计算力学大会2018

【发表日期】

：

2018年10期

【关键词】

：

FLAC3D ABAQUS 软件比较边坡分析强度折减法

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Numerical Analysis of Concrete Pavement Slab Cracking under Multi-Head Impact Loading

The rubblization construction technology of old concrete pavement under low-speed impact loading is an important technical way to realize its homogeneous regeneration and utilization,the research on o

会议

regeneration and utilizationCDEMimpactfracture

基于三维接触有限元分析的管片等效抗弯刚度和错台量研究

管片接头抗弯刚度是管片设计中的重要参数，不仅与管片材料和构造相关，还与接头所受弯矩和轴力相关，具有明显的非线性特性。本文通过三维接触有限元分析，计算了管片接头在不同载荷条件下的接头张开量，并据此建立了基于Kriging 代理模型的抗弯刚度-轴力-偏心距的近似关系表达。

会议

管片接头抗弯刚度代理模型纵缝错台

Rock Mechanics Characteristics Test and Stope Stability Study in Dajishan Tungsten Mine

Rock mechanics test is the basis for obtaining the mechanical parameters of rock and an important means to study rock mechanics and engineering.In this paper,uniaxial compression deformation test,Braz

会议

Rock mechanics testMechanical propertiesStope parametersNumerical simulation

Numerical calculation analysis of structural stability of cemented fill in different lime-sand ratio

The effect of the ratio of lime-sand and the concentration of slurry on the mechanical properties of the backfill is extremely important.In order to accurately select the optimum ratio of cemented tai

会议

Cemented backfillMatching ratioFLAC3DNumerical Analysisstability

Fractional Plasticity and its Application in Constitutive Modelling of State-dependent Geomaterials

The strength and deformation behaviour of granular soil highly depend on its state.Due to the change of soil state,the plastic flow and loading directions are usually non-coaxial.

会议

Fractional plasticityFractional CalculusConstitutive relationsState dependenc

Mining scheme optimization and stope structural mechanic characteristics for deep and large ore body

In order to some large ore bodies with poor environment,it is of great significance to design a reasonable mining scheme for the stress characteristics and stability of stope structures.In this paper,

会议

Deep mineLarge ore bodyMining schemeMechanical characteristicsStope stabilit

Numerical investigation on the hydraulic fracture propagation of natural coal formation using X-FEM

Hydraulic fracture driven by fluid in coal formation will inevitably interact with natural cracks.The paper proposes a computational approach for simulating the hydraulic fracture behavior of natural

会议

hydraulic fractureX-FEMcrack interactionhydraulic networknatural coal format

颗粒材料中颗粒间压缩破碎过程的离散元数值模拟与分析

颗粒材料是土木、交通、水利等工程中广泛用的一种建筑材料。该类材料由大量离散颗粒组成，其宏观力学行为取决于颗粒的运动和颗粒间的相互作用，受到颗粒排列密度、颗粒大小和形状等各种细观组构因素的影响，非常复杂。其宏观力学行为本质上取决于细观尺度上每个颗粒的运动。

会议

颗粒材料颗粒破碎破碎机理

Upper Bound Method of Non-Persistent Jointed Rock Slope Using Rigid Block Element Method

Non-persistent jointed rock masses have the rock bridge mechanical effects.The bearing capacity of the non-persistent jointed rock masses is mainly controlled by three factors: geometric distribution

会议

Rock sloperock mechanicsnon-Persistent Jointedlimit analysis

Research on the fracture propagation law of horizontal wells multi-cluster fracturing in shale gas r

In order to study the interference between fractures influence on the law of fracture propagation during horizontal wells multi-cluster fracturing in shale gas reservoir,anisotropic damage subroutine

会议

Multi-cluster fracturingFracture propagationShale gas reservoir

关于FLAC3D和ABAQUS在边坡稳定性分析中的比较

与本文相关的学术论文