alloyed相关论文
The valence electron structures and bond energy of M3C pattern carbides in white cast irons are calculated on the basis ......
Influence of Cr element on impact fracture process of ductile Ni-resistant alloyed iron at low tempe
In this study, in order to investigate the influence of Cr element on the impact fracture process of ductile Ni-resistan......
Direct Synthesis of Zn_(1-x)Cd_xS (0≤x≤1) Quantum Dots in Aqueous Solution and Application in Biolog
A simple procedure was presented to directly synthesize Zn1-xCdxS (0≤x≤1) quantum dots (QDs) in aqueous solution. QDs......
A general strategy to the synthesis of carbon-supported PdM(M=Co,Fe and Ni) nanodendrites as high-pe
Rational synthesis of a new class of electrocatalysts with high-performance and low-cost is of great significance for fu......
Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed pow
The fatigue strength of a high V alloyed powder metallurgy tool steel with two different inclusion size levels, tempered......
An as-cast bainite ductile iron with excellent mechanical properties and wear resistance was fabricated by alloying and ......
Zirconium is a rare metal which has high melting point (1 852 ℃), good mechanical property, excellent corrosion resista......
Effective diode-pumped continuous wave (CW) tunable laser action of a new alloyed crystal Yb:LYSO is demonstrated. The a......
Novel wide band gap alloyed semiconductors,x(LiGaO_2)_(1/2)-(1-x)ZnO,and fabrication of their thin f
Oxide semiconductor alloys of x(LiGaO2) 1/2-(1-x) ZnO were fabricated by the solid state reaction betweenβ-LiGaO2 and Z......
Band gap, which can be tuned by changing the size of quantum dots (QDs) based on the quantum confinement effect, plays a......
1.0μm gate-length InP-based InGaAs high electron mobility transistors by mental organic chemical vap
InGaAs high electron mobility transistors(HEMTs)on InP substrate with very good device performance have been grown by me......
Fabrication of 0.3-m T-gate metamorphic AlInAs/GaInAs HEMTs on silicon substrates using metal organi
We present an InGaAs metamorphic high electron mobility transistor(mHEMT) grown using Metalorganic Chemical Vapor Deposi......
Several kinds of special alloys are produced on the surfaces of iron and steels by using double glow surface alloying te......
As the loss of active material Mg may affect electrode’s discharge capacity and the cycling stability, a more refin......
Revealing the structure design of alloyed based electrodes for alkali metal ion batteries with in si
Alloyed based anode materials with high theoretical specific capacity and low reaction potential are considered to be hi......
The amorphization and magnetic properties of Fe_(62)Nb_(38) mechanically alloyed powders were investigated. In the init......
The structural evolution and stability of Fe_ 100-x Ni_x(x=10, 20, 35, 50) alloys prepared by mechanical alloying were i......
Application of phase diagram calculations to development of new ultra-high temperature structural ma
In-situ refractory metal intermetallic composites(RMICs) based either on (Nb, Si) or (Mo, Si, B) are candidate materials......
Synthesis and grain growth kinetics of in-situ FeAl matrix nanocomposites(Ⅱ):Structural evolution an
Morphological changes,structural evolutions and grain growth kinetics of mechanically alloyed(MAed)Fe50Al50,Fe42.5Al42.5......
Two sets of internal-Sn Nb3Sn superconducting strands were fabricated through RRP method, one with 2 wt% of Ti alloyed i......
Application of the Extrusion to Increase the Binding between the Ceramic Particles and the Metal Mat
Aluminum alloyed with magnesium and silicon has been used as the matrix material owing to its excellent mechanical prope......
Titanium alloyed steel has been widely used as automobile sheet steels, thick plate steels, and also stainless steels to......
Corrosion Behavior of Cr Micro-alloyed Corrosion-resistant Rebar in Neutral Cl~--containing Environm
A new low-cost corrosion-resistant rebar(HRB400R)was designed and fabricated by Cr micro-alloying.The HRB400 Rrebar had ......
Mechanical alloying was employed to obtain high-activity Ni-Al powder. The effects of mechanical alloying on the microst......
Sinter-hardening properties of partially-diffuse alloyed Fe-Cu-Ni-Mo-C material prepared by die wall
The sinter-hardening properties of a partially-diffuse alloyed Fe-2Cu-2Ni-1Mo-1C material were investigated. Samples wer......
C-Mn segregation and its effect on phase transformation and plastic deformation in Fe-Mn-C alloys were studied through t......
Liquid-phase enhanced sintering of powder metallurgy(P/M)316L stainless steel by addition of sintering aids was studied.......
Relationship between powder characteristic and internal oxidation of Al in Cu-Al pre-alloyed powders
Since Cu-Al powder characteristics have important effects on the preparation of Cu/Al2O3 composite, the apparent activat......
Novel wide band gap alloyed semiconductors, x(LiGaO_2)_(1/2)-(1-x)ZnO, and fabrication of their thin
Oxide semiconductor alloys of x(LiGaO2)1/2-(1-x)ZnO were fabricated by the solid state reaction between β-LiGaO2 and Zn......
In this study,coatings of zirconia alloyed with8wt% yttria were prepared by plasma spraying.A comprehensivesequence of a......
Mechanical alloying (MA), which has been described by Benjamin, is an industrialpowder metallurgy method known from the......
Scanning tunnelling microscopy (STM) has been employed to investigate the fine surface structure of alloyed materials i......
Ti-5.3Al-4.2Sn-2Zr-1Mo-0.25Si-1N high-temperature titanium alloy was developed bythe Institute of Metal Research, Chine......
Novel spin-glass alloys were synthesized by milling intermetallic compounds and also by milling mixtures of crystalline ......
Amorphous and nano-crystalline structures of mechanically-alloyed Al-24.4%Fe(mole fraction) powder m
Elemental powders of Al-24. 4 % Fe (mole fraction) alloy were mechanically-alloyed using a conventional type ball-millin......
A fluidized bed jet milling process was used to make micro-fine high Nb-containing TiAl alloyed powders from the chippin......
Tungsten, molybdenum and cobalt were co-diffused into the surface of ingot, 20 steel, 45 steel and T8 steel by a double ......
Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity co......
To achieve high carbon hard-facing weld metals with both high hardness and crack resistance, strong carbide forming ele......
High speed steel （HSS） rolls can replace traditional rolls such as alloyed cast iron rolls and powder metallurgical （PM） har......
Effect of Copper and Bronze Addition on Corrosion Resistance of Alloyed 316L Stainless Steel Cladded
A sandwich structure with cladding alloyed 316L stainless steel on plain carbon steel was prepared by means of powder m......
The La_(2/3)Ca_(1/3)Mn_(1- x )Cu_ x O_3 (0≤ x...
XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with th
: The Ni-Cr-Mo-Cu multi-element surface alloying with the electric brush plating Ni interlayer on the low carbon steel ......
The aim of present work is to investigate the influencing factors on mechanical property stability of Cu-Mo-Ni alloyed a......
Cr-alloyed MoSi2 was compared with monolithic MoSi2 with respect to oxidation at 450 ℃ for 456 h. Phases formed on Cr-a......
In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the c......
Modified coatings including carbide of iron,nickel,chromium,silicon,and titanium are obtained on 9Cr18 stainless steel s......
In order to investigate the regularity of metal magnetic signals of ferromagnetic materials under the effect of applied ......
The effect of trace Sn on the pitting morphology of high voltage anode aluminum foils was investigated.The distributions......
