论文部分内容阅读
A new quasi-nano wear mechanism (QNWM) has been proposed in this paper based on the facts of wear curve turning under high energy impact contact loading.Its characteristic is that the wear rate of QNWM is only 1/10-1/3 that of delamination mechanism at the same energy density.The diameters of wear debris and pits on the worn surfaces fall into the quasi-nanometer scale (about 50-120 nm).The necessary and sufficient conditions,which bring about the QNWM,are:(i) the nano-structure (nano-crystalline + amorphous phase) in impact contact surface layer has formed by the intensive impact strain;(ii) the delamination wear cracking in sub-surface layer must be restrained;(iii) the microcracks of QNWM are produced in amorphous phase of surface nano-structure layer rather than in nano-crystalline.
A new quasi-nano wear mechanism (QNWM) has been proposed in this paper based on the facts of wear curve turning under high energy impact contact loading. Its characteristic is that the wear rate of QNWM is only 1 / 10-1 / 3 that of delamination mechanism at the same energy density. These diameters of wear debris and pits on the worn surfaces fall into the quasi-nanometer scale (about 50-120 nm). necessary and sufficient conditions, which bring about the QNWM, are :( i) the nano-structure (nano-crystalline + amorphous phase) in impact contact surface layer has formed by the intensive impact strain; (ii) the delamination wear cracking in sub-surface layer must restrained; (iii) the microcracks of QNWM are produced in amorphous phase of surface nano-structure layer rather than in nano-crystalline.