【摘 要】
：
The effects of Mg on the microstructure and growth kinetics of the hot-dip Zn-22.3Al-1.1Si-x Mg (x = 0, 0.2, 0.4, and 0.6) coatings were investigated in detail. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction studies
【机 构】
：
Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The effects of Mg on the microstructure and growth kinetics of the hot-dip Zn-22.3Al-1.1Si-x Mg (x = 0, 0.2, 0.4, and 0.6) coatings were investigated in detail. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction studies revealed the presence of η-Zn, α-Al, Zn/Al eutectoid,(Si), Al/Si eutectic, and Zn/Al/Mg2Zn11 ternary eutectic on the top surface of these Mg-containing coatings.Especially, a small amount of MgZn2 phase appears in top surface of Zn-22.3Al-1.1Si-0.6Mg coating. Five phases are found in the alloy layers, i e, Fe2Al5, FeAl3, τ5C, τ5H, and τ1. The addition of 0.2％ Mg can delay the emergence of FeAl3 phase. When the Mg content is more than 0.2％, the outer layers of coating change from τ5C to τ5H phase. The growth of the inhibition layer is diffusion controlled for various Mg content baths. Mg improves the corrosion resistance of the Mg-containing coatings, and the Zn-22.3Al-1.1Si-0.6Mg coating possesses the highest protective properties.
其他文献
The friction reducing properties of sulfonated graphene as a lubricating additive were investigated using a four-ball machine tester with high carbon chromium bearing steels GCrl5 (SAE52100)friction pairs.The microscopic morphology,elemental composition,a
In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by dynamic shear rheology (DSR), fluoresc
The feasibility of using different generations of recycled fine aggregate(RFA)in structural concrete in a chloride environment was evaluated by studying the performance of the RFA and the corresponding concrete.The different generations of RFA were recycl
A comprehensive investigation was made on the electronic structure, thermal expansion coefficient and light absorption spectrum of total six transition metal dichalcogenides (TMDs) compounds with formula of MX2 (M=Mo, W, Cr, X=S, Se). First, an indirect-d
We studied the characteristics of two-scale pore structure of preform in the deposition process and the mass transfer of reactant gas in dual-scale pores, and observed the physiochemical phenomenon associated with the reaction. Thereby, we established mat
Polyurethane polymer grouting materials were studied with conventional triaxial tests via the particle flow code in two dimensions (PFC2D) method, and the simulation results agreed with the experimental data. The particle flow code method can simulate the
The gradient copolymers of acrylic acid and trifluoroethyl methacrylate (coded as P (TFEMAgrad-AA) ) were synthesized via reversible addition-fragmentation transfer (RAFT) emulsifier-free emulsion polymerization. The spontaneous batch feeding approach was
The (001) oriented BiFeO3 thin film was deposited on the Nb: SrTiO3 substrate by radio frequency magnetron sputtering technology, and the bipolar resistive switching effect was observed in the BiFeO3/Nb: SrTiO3 heterostructure. The results showed that the