【摘 要】
：
Because of low mechanical strength,pure magnesium has limited applications and is usually alloyed with some elements such as aluminum,manganese,zinc and rare earth in order to improve its mechanical p
【机 构】
：
Jiangxi Key Laboratory of Surface Engineering,Jiangxi Science and Technology Normal University,Nanch
【出 处】
：
Fifth International Conference on Surface Engineering(第五届表面工
论文部分内容阅读
Because of low mechanical strength,pure magnesium has limited applications and is usually alloyed with some elements such as aluminum,manganese,zinc and rare earth in order to improve its mechanical propertiesand/or corrosion resistance.Even so,appropriate surface treatment methodsneed to be used to further improve its corrosion resistance prior to service.Basedon the conventional anodic oxidation,micro arc oxidation is developed and widely used to fabricate a protective coating on valve metals including magnesium alloys.This paper reports our work on micro arc oxidation on Mg alloys.Pure magnesium,AZ91HP and Mg-Li were separately anodized to investigate the effects of substrates on anodizing time,surface morphology,thickness and compositions.
其他文献
Reactive magnetron sputtering technique was used to gain titanium nitride (TiN) films on W18Cr4V high-speed steel and GCr15 bearing steel substrates at low temperature.In order to ensure substrates in
Diamond-like carbon films have received considerable interest for more than a decade because of their excellent tribological properties.While their poor adhesion strength,especially with ferrous subst
Up-scaled deposition process of Teer-UDP850/4 has been established and used for massive production of CrTiAlN hard coatings in applications of anti-wear,cutting and forming tools.This deposition syste
The dynamics of film surface waves has received much attention from various industries because it has a dramatic effect on transport rates of mass,heat and momentum in devices such as distillation and
A new finishing method uses an effective electrode connecting with a nonconductive grinding tool to execute the design of compound processes of electrochemical finishing and grinding following tuming
In order to develop an environmental-benignly process to form chemical conversion coating on 6063 Al alloy and to substitute the traditional toxic hexavalent chromium treatment,a new surface treatment
NdFeB magnets were highly susceptible to corrosion in various environments.Protective Zn-Ni coatings electrodeposited on NdFeB permanent magnets from weak acid solutions were investigated in this pape
The decorating treatment of graining on 6063 aluminum alloy had been done.The main technical processes included electrochemical graining at alternating current,anodic oxidizing and chemical coloring.I
Ceramic coatings were deposited on AZ31B magnesium alloys by constant current micro-arc oxidation (MAO) in 0.333 mol/L (NaPO3)6 +2 g/L NaOH electrolytes with and without the addition of triethanolamin
Adopting suitable pretreatment,a compact and even nickel-phosphorus alloy coating was obtained on W-Cu alloy by electroless deposition from solutions containing nickel sulphate as a source of nickel a