The fretting characteristics of TiN coated Zircaloy-4 tube were investigated experimen-tally. The fretting experiment was performed using TIN coated Zircaloy-4 tube as the fuel rod clad-ding material and uncoated Zircaloy-4 tube as one of grids. TIN coating is probably one of the mostfrequently and successfully used PVD coatings for the mitigation of fretting. In this study, TiN coat-ing by PVD was employed for improvement of Zircaloy-4 tube fretting characteristics. The frettingtester was designed and manufactured for this experiment. The number of cycles, slip amplitudeand normal load were selected as main factors of fretting. The results of this research showed thatthe wear volume of TiN coated Zircaloy-4 tube increased as number of cycles, normal load andslip amplitude increase but the quantity of volume was lower than the case of uncoated Zircaloy-4tube pairs. The fretting characteristics of TiN coated Zircaloy-4 tube were investigated experimentally-tally. The fretting experiment was performed using TIN coated Zircaloy-4 tube as the fuel rod clad-ding material and uncoated Zircaloy-4 tube as one of grids. TIN coating is probably one of the mostfrequently and successfully used PVD coatings for the mitigation of fretting. In this study, TiN coat-ing by PVD was employed for improvement of Zircaloy-4 tube fretting characteristics. The frettingtester was designed and manufactured for this experiment. The number of cycles, slip amplitude and normal load were selected as main factors of fretting. The results of this research showed that the wear volume of TiN coated Zircaloy-4 tube increased as number of cycles, normal load and sll amplitude increase but the quantity of volume was lower than the case of uncoated Zircaloy-4tube pairs.