【摘 要】
：
For Ag alloy film used for the storage media,it is required to have heat-resistance,anti-constant temperature and anti-constant humidity characteristics,corrosi
【机 构】
：
Department of Material Science and Engineering,Ishifuku Metal Industry Co Ltd
论文部分内容阅读
For Ag alloy film used for the storage media,it is required to have heat-resistance,anti-constant temperature and anti-constant humidity characteristics,corrosion resistance,while high reflectivity over Al is maintained. An Ag alloy thin film (additive element Pd,Cu,P) was created on glass substrates,and various heat treatment was conducted. Then,fine structure was observed on this thin film using AFM,and fine structure evaluation of the inside was carried out by the in-plane diffractometry and X-ray diffractometry,and in addition,residual stress analysis was carried out. These results were compared and were examined,and fine structure and physical property in a metallic thin film were evaluated,and usefulness of evaluation method was verified.
其他文献
Polycrystalline bulk Ti3AlC2 material with high purity and density was fabricated by hot pressing from the powder mixture with the starting stoichiometric mole
As-cast AZ91+XCa (X=0, 0.5%, 1.0%, 1.5%, mass fraction) magnesium alloys were extruded into tube at 380℃ with an extrusion ratio of 6:1. The tensile properties
The true stress-strain curves of compressed ZK60 alloy have two typical characters. Most thermal simulation compressing curves of ZK60 have the obvious characte
Alloying is an important method to improve properties of casts. The influences of Mo and RE on the mechanical properties of ZG30Cr were investigated in this wor
The effects of carbon on the microstructure and mechanical properties of DD99 single crystal superalloy were investigated. The results show that stress rupture
Hafnium carbide (HfC) was applied in space and aerospace due to its ultra high melting temperature, high specific strength and moderate oxidation resistance. A
The diffusion behaviors of helium atoms at two symmetric grain boundaries (Σ5{210} and Σ3 {112}) of Pd were investigated using molecular dynamics simulations
C + ion beam-assisted deposition was utilized to prepare deposit diamond-like carbon (DLC) film.With the help of a series of experiments such as Raman spectrosc
The influences of solidification rate on the microstructures of cast strips and corresponding sintered NdFeB magnets were investigated. The experimental results
The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concr