论文部分内容阅读
激光相机为SCOPIX LR 3300洗片机为CURIX 260 故障现象: (1)开机后机器自检不能完成,机器报错ERROR 405随后机器再报错ERROR 621。 故障检修:根据故障现象分析可能有以下原因造成:(1)在插头J4的第4插针上是来自POLYGON(多棱镜)马达控制器310 GS的起动信号,大约在40秒后仍未接通。(2)106GS的24V的电源电压丢失。检测:在310GS的J4插头的4和7插针之间测量其电压均正常。原因(1)可排除。在POLY-
Laser Camera for the SCOPIX LR 3300 processor for the CURIX 260 Symptom: (1) after the machine boot can not be completed, the machine error ERROR 405 then the machine error ERROR 621. TROUBLESHOOTING: Depending on the cause of the malfunction, the following causes may occur: (1) On pin 4 of pin J4 is the start signal from the POLGON motor controller 310 GS and remains unconnected after about 40 seconds. (2) The 106V 24V supply voltage is lost. Detection: J4 plug in the 310GS 4 and 7 pins measured between the voltage is normal. Reason (1) can be ruled out. In POLY-