【摘 要】
：
The main objective is to provide an evidence of spatial dependence of mechanical responses of a heterogeneous aluminum brazed joint re-solidified clad,and to co
【机 构】
：
State Key Laboratory of Advanced Production Technology,Center for Robotics and Manufacturing Systems
论文部分内容阅读
The main objective is to provide an evidence of spatial dependence of mechanical responses of a heterogeneous aluminum brazed joint re-solidified clad,and to confirm a sufficient sensitivity of a nano-indentation--load curve method for identifying the dependence.Topological features of a network of solidification microstructures(αphase and eutectic),formed during quench in a brazing process of aluminum alloy,influence significantly dynamic mechanical responses of resulting heterogeneous material.Nano/micro indentation depth vs load characteristics of differing phases suggest a spatially sensitive mechanical response of a re-solidified fillet in the joint zone.Hence,a spatial distribution,pattern formations and other morphological characteristics of microstructures have a direct impact on an ultimate joint integrity.Topology-induced variations of indentation-load curves was presented.A hypothesis involving microstructures'spatial distribution vs mechanical response was formulated.
其他文献
Oxygen storage and adsorptive properties of praseodymium oxides were investigated by pulse experiments and temperature-programmed desportion/reduction (TPD/TPR)
A method for preparation of particle crystal film constructed from monodisperse silica colloidal particles in diameter of about 300 nm is reported. The films we
The physicochemical features of phosphorus-modified ZSM-5 zeolites (SiO2/Al2O3 molar ratio is 25)were characterized by XRD(X-ray diffraction), BET(Brunauer, Emm
MnxCd1-xIn2Te4 (x=0.1) ingot was successfully grown by the modified Bridgman technique, which applied the accelerated crucible rotation technique (ACRT) in Brid
Complex of rare earth with carboxylic acid was prepared by precipita tion and direct method. It was copolymerized with such monomers as acrylic acid and other o
Using the JQ-Ⅱ high pressure hydrogenation micro-reactor unit, the reactivity of Athabasca bitumen derived heavy gas oil was studied over commercial and homema
Lipophilic tea polyphenols (LTP) were prepared by catalytic esterifica tion of green tea polyphenols (GTP) with hexadecanoyl chloride. A novel long-ch a in acyl
The palladium/yttrium films were prepared using magnetron sputtering technique.The changes of crystal structure,morphology and optical properties of the films d
In this paper, a generalized model of the reactive distillation processes was developed via rate-based approach. The homotopy-continuation method was employed t
The poly-aminosilicone-rare earth composite was prepared by poly-aminosilicone cross-linked with rare earth and active silanol. The thermal stability of the com