Detection of <i>Salmonella enterica</i>Serovar Rissen in Slaughter Pigs

来源 :微生物学(英文) | 被引量 : 0次 | 上传用户:hehe521_
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Salmonella enterica serovar Rissen has been recognised as a common serovar in humans and pigs around the world. This study investigated S. Rissen prevalence in pigs slaughtered in Northern Ireland additionally looking at antibiotic susceptibility profiles
其他文献
合肥市任建委颁布《关于开展施工现场重大事故隐患网上公示督办工作的通知》,将以下10种情形列为重大事故隐患,分别是:工程项目不具备安全生产条件,施工现场文明施工差、深基坑支
据报道,美国加州新光技术公司(Newlight Technologies)在10月11日宣布,将为其气体转塑料生产线每年新增约45t的产能。该公司称,这种工艺能把空气以及二氧化碳和甲烷等温室气体转化
研究了预涂稀土涂层固体粉末渗硼工艺。结果表明,预涂稀土涂层的催渗作用比一般的粉末法RE-B共渗的催渗作用更为明显。预涂稀土涂层渗硼可显著提高渗硼层厚度,获得单一均匀的Fe
采用热化学酚化技术对竹粉进行液化,分离得到竹纤维素微粉(BCMP),对获得的BCMP表面进行马来酸酐(MAH)接枝改性,研究了反应温度和时间对酯化度的影响。结果表明,在二甲苯回流反应温度
A revised phase diagram for water shows three distinct fluid phases. There is no continuity of liquid and gas, and no “critical point” on Gibbs’ density surf
Among the most economically important fruit crops in South and North Kyrgyzstan affected by scab disease are apples (Malus domestica). Natural isolates of Ventu
研究了SiCp/Al系复合材料经不同热处理后在温度反复变化时的尺寸稳定性,结果表明,在温度反复循环后会产生累积残余应变εer,随循环次数的增多,εcr减小,尺寸趋于稳定,预处理对热循环累积残余应
分析了H13热挤压模具型腔变形原因,认为主要是由于原热处理工艺不当--淬火温度偏高、回火时未充分利用H13材料的二次硬化效应,使模具中不稳定组织过多所致.在此基础上提出了
Sedentary crop-livestock mixed farming is the predominant agricultural land use in Central Himalaya upland and largely rainfed;agrochemicals are not used at all