论文部分内容阅读
气动元件及其管道之间的连接,要求密封性好,无漏气。为此,我们自制了一种接头,气动元件间采用紫铜管连接,效果很好。连接方法见图示。将阀体接头1用铅油或聚氯乙烯薄膜密封后与阀体7联接。支架2拧在阀体接头1上并与底板6固定,然后拧紧固定螺母3,即可把阀体7固定。底板6装在合适的地方,要使阀体呈水平位置。在底板6处加工出能使阀体下部放入的圆孔,阀体7才能装到底板6上,并
Pneumatic components and their connections between the pipes, requiring good sealing, no leakage. To this end, we made a kind of joint, pneumatic components connected by a copper tube, the effect is very good. Connection method shown in the diagram. The valve body joint 1 with lead oil or PVC film sealed with the valve body 7 connection. The bracket 2 is screwed on the valve body connector 1 and fixed with the base plate 6, and then the fixing nut 3 is tightened to fix the valve body 7. The bottom plate 6 is fitted in place so that the valve body is in a horizontal position. The bottom plate 6 is machined to make the lower part of the valve body into the hole, the valve body 7 can be mounted on the bottom plate 6, and