论文部分内容阅读
分别在大气和氩气中制备了非晶Fe90Zr10条带采用AES及XPS,并结合氩离子原位溅射剥展,研究了气氛对条带自由侧及贴辊侧表面状态的影响结果表明,在大气中制备时,条带自由侧的Zr显著偏聚,贴辊侧发生了Fe的偏聚而在氩气中制备时,条带两侧表层的成分分布及氧化层厚度基本相同,均被一薄的氧化铁覆盖
The amorphous Fe90Zr10 ribbons were prepared by using AES and XPS in the atmosphere and argon respectively. The effects of atmosphere on the strip free side and the side surface state of the adhesive roll were studied. In addition, When prepared in the air, the Zr on the free side of the ribbon was significantly segregated, and the segregation of Fe occurred on the laminating roller side and the composition of the surface layer on both sides of the ribbon and the thickness of the oxide layer were almost the same when prepared in argon, Thin iron oxide cover