论文部分内容阅读
几年来我站使用自制的简易加油器,深受机手们欢迎。这种加油器由带螺纹油桶盖一个,φ35×650毫米钢管一根,φ15×200毫米钢管一根所组成。具体制作方法是:在油桶盖上钻φ35毫米、φ15毫米各一个孔,然后将两根钢管分别焊在对应的孔中,要焊严,不要透气。简易加油器就这样做成了(如图所示)。
Over the past few years I use the home-made simple carburetor, welcomed by the handlers. This oil from the tank with a threaded cap, φ35 × 650 mm a steel pipe, φ15 × 200 mm steel pipe composed of a. Specific production methods are: oil drum cover drilling φ35 mm, φ15 mm of a hole, and then welded to the two corresponding holes in the pipe, to be strict, not breathable. The simple oil cooler is made like this (as shown).