论文部分内容阅读
在工厂自动化过程中,电镀工序是最难攻克的瓶子口。然而,我们已在电镀工序无污染和设备紧凑方面获得了成功,从而才得以将此系统安装到生产线里,建立一条连续的生产线,使电镀成本降为以前的一半。把阳极置于与被镀零件附近,用泵把溶液送到两者之间的空间,从而得到了60μm/min 的最佳镀铬速度。这样,在显著改善电度层质量的同时,其电镀速度比常规方法快100倍。功能性的电镀采用此系统是最合适的,能镀减震器杆、发动机的气阀零件和气缸等。
In the factory automation process, the plating process is the most difficult to overcome the bottle mouth. However, we have been successful in making the electroplating process clean and compact so we could install the system into the production line and create a continuous line that reduced plating costs by half. The anode was placed near the part to be plated and the solution was pumped to the space between the two to give an optimum chrome plating speed of 60 μm / min. In this way, while significantly improving the quality of the electrical layer, the plating speed is 100 times faster than the conventional method. Functional plating using this system is the most suitable, can be plated shock absorber rod, the engine valve parts and cylinders.