论文部分内容阅读
With ball-bearing and tribofilm lubrication effects,CuO vegetable oil-based nanofluids have exhibited excellent anti-wear and friction reduction properties.In this study,CuO nanofluids were synthesized by a one-step electro discharge process in distilled water containing polysorbate-20 and vegetable oil as a nanoparticle stabilizer and source of fatty-acid molecules in the base fluid,respectively.Pin-on-disk tribotests were conducted to evaluate the lubrication performance of synthesized CuO nanofluids between brass/steel contact pairs under various loadings.Surface grinding experiments under minimum lubrication conditions were also performed to evaluate the effectiveness of the synthesized nanofluids in improving the machining characteristics and surface quality of machined parts.The results of pin-on-disk tests revealed that adding nanofluids containing 0.5％ and 1％ (mass fraction) CuO nanoparticles to the base fluid reduced the wear rate by 66.7％ and 71.2％,respectively,compared with pure lubricant.The lubricating action of 1％ (mass fraction) CuO nanofluid reduced the ground surface roughness by up to 30％ compared with grinding using lubricant without nano-additives.These effects were attributed to the formation of a lubrication film between the contact pairs,providing the rolling and healing functions of CuO nanoparticles to the sliding surfaces.The micrography of ground surfaces using a scanning electron microscope confirmed the tribological observations.