论文部分内容阅读
1.清洗机水管堵漏我厂1986年生产的一批XC-3型超声波清洗机,运行试验中有数台清洗机的上、下水管有不同程度的漏水现象。这些水管曲折排列在机体内,按常规需要将整机吊起架空,再将接头拆开,重新上铅油,更换麻丝等,这样做既费时、费力,又影响产值计划的完成。经研究我们采用了AR-5粘接剂(襄樊市生物化学研究所产)堵漏,即把接头松开,擦干水份,后将调好的AR-5胶均匀涂布在接头上,拧紧接头,隔夜再试机,无一漏水。2.减速箱连接轴治漏
1. Washer pipe plugging Our factory in 1986 produced a number of XC-3-type ultrasonic cleaning machine, running the test several washing machines, under the water pipes have different levels of water leakage. These pipes are arranged in a tortuous way in the body. According to the conventional needs, the whole machine is hoisted overhead, the connectors are disassembled, the lead oil is returned, the hemp thread is replaced, etc. This is time-consuming and labor-intensive and affects the completion of the output plan. After research we used AR-5 adhesive (Xiangfan Biochemical Institute) plugging, that is, the connector loosened, dry the water, the AR-5 glue will be adjusted after the uniform coating on the connector, Tighten the connector, try again overnight, without a leak. 2. Gearbox connection shaft leakage management