论文部分内容阅读
以前接皮带时均采用打卡子及过热硫化(即蒸气加热)胶接的方法。1979年我们准南望峰岗选煤厂在换接精煤运输皮带(带宽800毫米,长125米,布层数为6层,倾角为18°,运输能力为180吨/时、速度为2.08米/秒,电机功率为15kw)时,采用冷硫化胶接皮带,经过几个月的使用,实践证明冷硫化胶接皮带是可行的,并又成功的在同类型号的原煤皮带中使用,其抗拉强度不小于热硫化胶
Before the belt are used to hit the clip and overheating curing (ie, steam heating) glue the method. In 1979 we quasi-Nan Wang Fenggang coal preparation plant in the transfer of coal transport belt (bandwidth 800 mm, length 125 meters, the number of layers 6, inclination 18 °, transport capacity of 180 tons / hour, the speed of 2.08 M / s, motor power of 15kw), the use of cold vulcanized adhesive belt, after several months of use, proven cold vulcanized adhesive belt is feasible and successful in the same type of coal belt used, and its Tensile strength not less than heat vulcanized rubber