英国国立工程实验室《National Engine-ering Laboratory》和卡农液压公司《CarronHydraulics Ltd.》合作制成一种新型低速大扭矩轴向多作用柱塞马达,共分三种系列,排量分别为:60～120、165～330和380～764毫升/转,每种系列中,是采用不同的滚道盘来获得该范围内不同的排量的。每个马达仅包括五个主要部件:配流轴、滚道盘、转子、壳体和柱塞。转子上均匀分布着九个与中心线和配流轴轴线平行的贯通柱塞孔,从每个孔的两端各装 A new type of low-speed, high-torque axial multi-actuated piston motor was developed in collaboration with the National Engineering Laboratory “National Engine-ering Laboratory” and the Canon Hydraulics company “Carron Hydraulics Ltd.”, which are divided into three series. The displacements are: 60 ~120, 165-330, and 380-764 ml/rev. In each series, different raceway disks were used to obtain different displacements in the range. Each motor includes only five main components: the flow shaft, raceway plate, rotor, housing, and plunger. Nine penetrating plunger holes parallel to the center line and the axis of the flow distribution shaft are uniformly distributed on the rotor, and are installed from both ends of each hole.